71_burton
Well-Known Member
- Joined
- Mar 29, 2011
- Messages
- 73
I built this RC Tube Chassis in hopes of having a full on high horsepowered long wheelbased rear steered Hill climbin' Machine. Did I succeed? Yes. But, I had so much Horsepower and I had some of the toughest parts on the shelves that it just couldn't stay together so Im selling the chassis and starting over with a slower jeep style chassis.
With this chassis I ran a 14'' Wheelbase. Its based off of a HPI Bronco, I built it out of 3/16 Brakeline and I MIG Welded it. I don't really have to sell it as it is not eating anything, I haven't really ran this chassis all that long so Its not beat to death, but It could use a new hood. It has a hole in the top where somebody mounted a blower (gott the body used), the rest of the Hood is kinda beat up too. The paint has some nicks in it and if it sells it will get a Fresh coat of Satin Black paint. The skid plate is welded to the lower link mounts. It all basically makes a little box at the bottom and works quite well, Better than I thought It would. The Skid plate is drilled for 2 different transmission an Axial Transmission and a Losi comp crawler transmission. So you could run one or the other. Im asking $150 for this chassis.
For more information call or text 931-205-7247
These pics are of it mounted up. Chassis only is forsale.
This is wear battery mounts.
With this chassis I ran a 14'' Wheelbase. Its based off of a HPI Bronco, I built it out of 3/16 Brakeline and I MIG Welded it. I don't really have to sell it as it is not eating anything, I haven't really ran this chassis all that long so Its not beat to death, but It could use a new hood. It has a hole in the top where somebody mounted a blower (gott the body used), the rest of the Hood is kinda beat up too. The paint has some nicks in it and if it sells it will get a Fresh coat of Satin Black paint. The skid plate is welded to the lower link mounts. It all basically makes a little box at the bottom and works quite well, Better than I thought It would. The Skid plate is drilled for 2 different transmission an Axial Transmission and a Losi comp crawler transmission. So you could run one or the other. Im asking $150 for this chassis.
For more information call or text 931-205-7247
These pics are of it mounted up. Chassis only is forsale.
![100_6624.jpg](http://i272.photobucket.com/albums/jj164/kx_71racer/100_6624.jpg)
![100_6626.jpg](http://i272.photobucket.com/albums/jj164/kx_71racer/100_6626.jpg)
This is wear battery mounts.
![100_6628.jpg](http://i272.photobucket.com/albums/jj164/kx_71racer/100_6628.jpg)
![100_6629.jpg](http://i272.photobucket.com/albums/jj164/kx_71racer/100_6629.jpg)