metal_miles
Member
- Joined
- Nov 1, 2015
- Messages
- 11
- Reaction score
- 0
Looking to trade my full tube chasis rig for a nice daily driver like a rubicon or something of that sort to pull my RZR. Never thought I would do this but plans change and rigs can be built again. I have the tranny out at the moment but will be reinstalled soon, just wanting to get an idea of what's out there
MOTOR:
SBF 302 on propane
Sm435 trans NWF triple stick np203 with a doubler with a 205. Full hydro with PSC overflow reservoir and filter.
Fluidyne radiator
AXLES:
Rear axle is a solid industries 60 with E350 chunk and half inch thick tubes. Has a Yukon 35 spline spool and 35 spline chromo ECGS shafts and chromo spindles with RCV drive flanges Linked with 4.88s and disc brake conversion
Front axle is a full width 44 with 4.88s welded with chromo shafts 30 spline inners and 19 outer from ECGS. Has Clayton bracket radius arm and high steer. Full hydro with single ended ram. With an 2 piece driveshafts from olivers
RUBBER:
Sitting on a set of 40 inch creepy crawlers with H2's
SUSPENSION:
Sway away 2.5 race runner coilovers in the front and fox 2.5 air shocks in the rear.
EXTRAS:
I also have many other spare parts such as double ended PSC ram set up, 2.0 bump stops, corbeau seats, smittybilt XCR10 with synthetic rope, 40" light bar, a high pinion kingpin front 60 and some other odds and ends
I'm sure I'm forgetting some stuff. I love this rig to death and hate to see it go so please no junk. Plans have changed. Seeing as I need a price 15k or trade for daily driver
Located in Rock Hill SC, 30 min south of charlotte
****extras only included for the RIGHT trade****
Sent from my iPhone using Tapatalk
