John Galbreath Jr.
38 Special & Solo Buggy
- Joined
- May 24, 2007
- Messages
- 8,613
- Reaction score
- 3
Chassis is currently set up for a Chevy 350/383 motor. TH350 transmission and Atlas transfer case. All body panels dzus clip on for easy removal for washing or maintenance.
Included with the chassis:
Rear four link bars
Front three link bars, with panhard bar (upper link and panhard come with heims)
Steering column
Steering wheel
Advanced Adapter Headers
Two MagnaFlow mufflers
Exhaust pipes
Aluminum firewall and floor pan
Narrowed Jeep CJ Grill
Narrowed Jeep CJ Fiberglass hood
Newly wrapped aluminum body panels with plexiglass viewing panels
Mount for Wilwood brake pedal
Mount for front winch
Engine mount on chassis
Moroso engine mounts
Completely removable (bolt on) belly pan with UHMW skid plate built by Off Road Connection in Fultondale
Belly pan has built in transmission mount for TH350
Belly pan has built in mount for Atlas using about 8 bolts on the bottom inspection cover
Aluminum dash which flips up for access
Water temperature gauge
Oil pressure gauge
Voltage gauge
Seat side console (I had switches and iPod there)
Located in Irondale, Alabama and ready for immediate pickup
Price: $2,750,
Now $2200 OBO
I will add to the pictures shortly, this one was as soon as I got the motor pulled out. I got it on a dolly today and rolled it outside today. I need to pressure wash the bottom and install the belly pan. Before I disassembled if last weekend, I took a bunch of pictures of the current condition.
Most people know this buggy and its capabilities.
I also have a Chevy 350 motor on a fresh build when I bought it for a spare, been sitting in a crate for 5 years. Motor is complete - $800
Bilstein Coilovers could be negiotated into the deal if desired. One leaks and needs a seal replaced. All have springs. - Price Neg.
Included with the chassis:
Rear four link bars
Front three link bars, with panhard bar (upper link and panhard come with heims)
Steering column
Steering wheel
Advanced Adapter Headers
Two MagnaFlow mufflers
Exhaust pipes
Aluminum firewall and floor pan
Narrowed Jeep CJ Grill
Narrowed Jeep CJ Fiberglass hood
Newly wrapped aluminum body panels with plexiglass viewing panels
Mount for Wilwood brake pedal
Mount for front winch
Engine mount on chassis
Moroso engine mounts
Completely removable (bolt on) belly pan with UHMW skid plate built by Off Road Connection in Fultondale
Belly pan has built in transmission mount for TH350
Belly pan has built in mount for Atlas using about 8 bolts on the bottom inspection cover
Aluminum dash which flips up for access
Water temperature gauge
Oil pressure gauge
Voltage gauge
Seat side console (I had switches and iPod there)
Located in Irondale, Alabama and ready for immediate pickup
Now $2200 OBO
I will add to the pictures shortly, this one was as soon as I got the motor pulled out. I got it on a dolly today and rolled it outside today. I need to pressure wash the bottom and install the belly pan. Before I disassembled if last weekend, I took a bunch of pictures of the current condition.
Most people know this buggy and its capabilities.
I also have a Chevy 350 motor on a fresh build when I bought it for a spare, been sitting in a crate for 5 years. Motor is complete - $800
Bilstein Coilovers could be negiotated into the deal if desired. One leaks and needs a seal replaced. All have springs. - Price Neg.