1350 Weld Yoke

KPatterson · Jul 12, 2015

Cant seem to find a 1350 weld yoke for a 2.25 inner diameter tubing. Can anyone point me in the right direction?

Beerj · Jul 12, 2015

This is the closest I could find.
http://www.dennysdriveshaft.com/p1564_dana_spicer_3_28_47_weld_yoke_1350_series_to_fit_2.5_inch_.0.html
Something like 2.34 o.d. on the yoke

KPatterson · Jul 12, 2015

Beerj said:
This is the closest I could find.
http://www.dennysdriveshaft.com/p1564_dana_spicer_3_28_47_weld_yoke_1350_series_to_fit_2.5_inch_.0.html
Something like 2.34 o.d. on the yoke

Found that one as well.

ratedX · Jul 12, 2015

Turn down a slip yoke that's how u make 250 wall shafts

jccarter1 · Jul 12, 2015

I can turn one down for you if needed

KPatterson · Jul 14, 2015

Turns out a marine 1350 yoke has more thickness than a traditional car yoke. Had a local driveline shop turn it down to 2.25" for me to meet my carrier bearing. Hope this helps anyone in the future.

Fire Freak · Jul 14, 2015

http://www.northerndrivetrain.com/product/SPI-3-28-47.html
Is as close as I could find

KPatterson · Jul 21, 2015

Problem solved

whiskeymakin · Jul 21, 2015

So did you have one turned down?

KPatterson · Jul 21, 2015

KPatterson said:
Turns out a marine 1350 yoke has more thickness than a traditional car yoke. Had a local driveline shop turn it down to 2.25" for me to meet my carrier bearing. Hope this helps anyone in the future.