watch my pig eat one tons

orangecrush1 · Jan 28, 2009

not too many pics but you git the idea.

orangecrush1 · Jan 28, 2009

as luck would have it the snow and cold kept me from making money so i stayed home and spent some

Not Jobless · Jan 28, 2009

What's the material thickness on your link mounts?

orangecrush1 · Jan 28, 2009

.250 dom

Not Jobless · Jan 28, 2009

orangecrush said:
.250 dom

Not the links.

The material/plate you are using to mount the links to the diff housing?

Not Jobless · Jan 28, 2009

Is that pic of your pan-hard bar at ride height or full droop?

orangecrush1 · Jan 28, 2009

Dam it the bright orb is back. must resist the temptation to go back to work. sunshine = money, Build = poor house damit

orangecrush1 · Jan 28, 2009

it is ride higth but only temp . ill address that issue and new top mount later.my old front set up was very close to that angle and oddly enugh worked well. no bumpstear with hydro.

Not Jobless · Jan 28, 2009

orangecrush said:
it is ride higth but only temp . ill address that issue and new top mount later.my old front set up was very close to that angle and oddly enugh worked well. no bumpstear with hydro.

Wasn't thinking bump steer with full hydro, just side hilling would be more stable if it was inverted from where it was or at least horizontal if you have room.

orangecrush1 · Jan 28, 2009

more pics

orangecrush1 · Jan 28, 2009

i think i have the room it was a patence thing ive been looking at how others have run thairs and it makeing smoke come out my ears.there's allot going on up front

jeepmauler · Jan 28, 2009

Is the single shear panhard mount permanent?

orangecrush1 · Jan 28, 2009

no its not and yep im up for sug. or good pic's of others to copy.

Not Jobless · Jan 28, 2009

orangecrush said:
no its not and yep im up for sug. or good pic's of others to copy.

Drop the frame mount side down as low as you can and raise the axle mount side as high as possible, and like mauler says, captivate it in a double shear mount.

Lot's of single seat buggies use a three link with a pan-hard, should be able to find some pics on Pirate.

orangecrush1 · Jan 28, 2009

old setup with Hannis track bar angle. allot like it is now. apparently i dont learn from my mistakes

orangecrush1 · Jan 28, 2009

that will shorten the bar considerably is that better then the steep angle

orangecrush1 · Jan 28, 2009

man what the hell is that in the picture i should have cropped out the shitter.

landbruiser1 · Jan 28, 2009

Is this a real 45? or a stretched 40? Badass eitherway.. I want your old front axle, but cant afford it yet...

Not Jobless · Jan 28, 2009

orangecrush said:
that will shorten the bar considerably is that better then the steep angle

when I re-did mine it was a trade off between length and angle...I was able to get it flat at ride height but it ended up a little shorter than when I had it on an angle at ride height.