• Help Support Hardline Crawlers :

busted out the sawzall on the samurai

Here's a few.
 

Attachments

  • 1.jpg
    1.jpg
    41.8 KB · Views: 410
  • 2.jpg
    2.jpg
    41.3 KB · Views: 409
  • 3.jpg
    3.jpg
    46.8 KB · Views: 414
  • 4.jpg
    4.jpg
    49.5 KB · Views: 408
hey Diss post up some pictures

well we cut the rest of the back off tonight..... its lookin pretty sorry right now....... I ordered my rear seat today I got the matching bench to the corbaeu baja ss that I have in the front..... we still need to figure out what fuel cell im going to run ...... :masturbanana[1]:
 
Got a few things done on it today in between the real payin customers
 

Attachments

  • 1.jpg
    1.jpg
    39.6 KB · Views: 278
  • 2.jpg
    2.jpg
    39 KB · Views: 283
  • 3.jpg
    3.jpg
    43.3 KB · Views: 283
also just ordered my fuel cell today from summit

Brand: RCI
Product Line: RCI Aluminum Fuel Cells
Part Type: Fuel Cells
Part Number: RCI-2161A
Capacity: 15 gallons
Fuel Cell Color: Natural
Fuel Cell Material: Aluminum
Foam: No
Sending Unit Included: Yes
Sender Ohm Range: 0 ohms empty, 90 ohms full
Length (in): 30.000 in.
Width (in): 9.000 in.
Height (in): 12.000 in.
Outlet Fitting Quantity: Three
Outlet Fitting Size: -8 AN
Return Fitting Size: -8 AN
Tip Over Valve Size: -8 AN
Sump: No
 
Last edited:
Is it just me or is your rear axle tacod? Upside down? Looks like the tires lean out at the top. :corn:

if you are talking about the very first picture.... yes it looks that way cuz there was 1 lug nut holding each rear wheel on... about 2 turns... just to roll it 5 feet forward...........good eye :awesomework:
 
Finally got the seat and fuel cell so i could start throwin some tube at it. Heres a few pics
 

Attachments

  • 1.jpg
    1.jpg
    62.2 KB · Views: 127
  • 2.jpg
    2.jpg
    67.7 KB · Views: 131
  • 3.jpg
    3.jpg
    65.6 KB · Views: 135
  • 4.jpg
    4.jpg
    73.6 KB · Views: 131
  • 5.jpg
    5.jpg
    100.5 KB · Views: 126
Back
Top