Yep still am.He lives on your side of the hill now.
-
Help Support Hardline Crawlers :
beadlock width.
- Thread starter CHOP SHOP
- Start date
Yep still am.He lives on your side of the hill now.
WHITE TRASH1
fruit stripe
17x9 TR with 3 1/2" backspace if I remember right. He had good luck with them which is more than I can say about his th350 case. :haha:
CHOP SHOP
Well-Known Member
I went from a aluminum 15X10 to a diy steel 15X7 (8 actual with new lip/bead)
Witha 16 inch wide swamper it made them alot more round instead of flat across the carcas.
I welded the wire in like binder said and well let me tell you that involves alot of swearing and flamable spray to get beaded up.
Witha 16 inch wide swamper it made them alot more round instead of flat across the carcas.
I welded the wire in like binder said and well let me tell you that involves alot of swearing and flamable spray to get beaded up.
Boosted
Well-Known Member
17" TR's are 9" wide? I just looked on thier site and it shows the 17's as being 8.5" wide. Did this recently change as my 15's are 9" wide as well.
WHITE TRASH1
fruit stripe
Boosted
Well-Known Member
For some reason I thought the 17's were 9.5". Im planning on ordering a set tomorrow to replace my 15's and when I looked on the site tonight, I noticed that they are 8.5's which is fine, but was curious as I see people say they are 17x9 often.
jeepmauler
Well-Known Member
- Joined
- Oct 17, 2006
- Messages
- 2,064
TR HD's are 8.75 from inside of the back bead(inside of the wheel lip,outside of the TIRE BEAD) to the OUTSIDE of the front bead(where the clamp ring compresses).......if you added the .375 of the clamp ring the WHEEL would be 9.125 overall width.
If you want to see tires mounted up to said wheels with 3.5" BS you could stop by my house and see mine....I also have a loose wheel with NO tire on it
If you want to see tires mounted up to said wheels with 3.5" BS you could stop by my house and see mine....I also have a loose wheel with NO tire on it
Boosted
Well-Known Member
You got cold :beer: ? :;
haha, I appreciate the offer tho. Im going to call Larry in the morning to place my order. Do you know if you have any red anodized rockrings in the warehouse? Also, dont forget you said you will build mine tomorrow. :awesomework:
jeepmauler
Well-Known Member
- Joined
- Oct 17, 2006
- Messages
- 2,064
Your set is next up in the mill......I "believe" I have red R/R's on the shelf......I'll check after break
EDIT: YES I have 17" Red R/R's in hand........haha I can hear you talking to L-bear in the other office
EDIT: YES I have 17" Red R/R's in hand........haha I can hear you talking to L-bear in the other office
Last edited:
Boosted
Well-Known Member
Your set is next up in the mill......I "believe" I have red R/R's on the shelf......I'll check after break
EDIT: YES I have 17" Red R/R's in hand........haha I can hear you talking to L-bear in the other office
lmao....too funny. Sweet! He just told me I can pick them up anytime so it looks like I will swing by Wed around 1pm on my way home from the airport.
Thanks Jeff....I appreciate you hooking me up!
zeek
Well-Known Member
got any pics of em yet B-rad
CHOP SHOP
Well-Known Member
the rings are here, http://www.nw-wheelers.com/forum/showthread.php?t=46835&highlight=clark but I just got them all painted and mounted last night.
jeepmauler
Well-Known Member
- Joined
- Oct 17, 2006
- Messages
- 2,064
Yes they are done.....I'll box'em up tomarrow.
All I can really do for locals is put them @ the head of the line/cut list and get them their parts ASAP......I can't do anything on pricing other than emphasis bringing cash. Also we/I are available for tech problems/solutions either @ TR or via the web
Boosted
Well-Known Member
Cool, looks like I might be ordering up a set of Bead-Looks as well.
See you on Wednesday....
Thanks again,
Bill
