• Help Support Hardline Crawlers :

Walker Valley saturday 9/11

Sounds like every thing went farely well. I wish I could of gone......

Good job guy! s:awesomework:
 
Thanks oil can....yeah, had a good crew/system workin'...Next time!!!
P.S. Boggers are gone....so ya don't have to worry about buying them!!! But I do have a set of 36"TSL sx's with your name on 'em!!!:D
 
That explains the mess then....woulda been nice to try and soak up the excess red stuff to keep the slick to a min...:;
Was the burnt one #5 (3rd one back on the dr side???)

Sorry for the mess... I am ordering some PIG pads now to carry in the buggy just incase we have a spill again.. There was nothing I could do about it last weekend. I am not the type to litter or leave a mess if I can help it. I felt bad.

Yes it is # 5. I need to get a 90* plug like you said. I am gonna go to a few dealers and see if they have any laying around left over from a tune up. :awesomework:
 
Sorry for the mess... I am ordering some PIG pads now to carry in the buggy just incase we have a spill again.. There was nothing I could do about it last weekend. I am not the type to litter or leave a mess if I can help it. I felt bad.

Yes it is # 5. I need to get a 90* plug like you said. I am gonna go to a few dealers and see if they have any laying around left over from a tune up. :awesomework:
:awesomework: on the pads....mine were in my trail box back at the truck, or I woulda taken care of it...
Napa sells singles as well....or at least used to...Hit up the independent shops as well. I know we have something at work that'd do the trick...
 
Yeah Duck....where'z da pics???:redneck: I just uploaded all 5 pics I took at the end of the day...:booo: and none show the progress from during the day, only the lil mishap...one Hi-Center'd Yota!!!:haha::haha::haha::redneck:
 

Attachments

  • HPIM5411.jpg
    HPIM5411.jpg
    97.1 KB · Views: 95
  • HPIM5413.jpg
    HPIM5413.jpg
    87 KB · Views: 103
  • HPIM5414.jpg
    HPIM5414.jpg
    118.9 KB · Views: 101
  • HPIM5415.jpg
    HPIM5415.jpg
    115.2 KB · Views: 102
10031469317778.jpg

10031479382784.jpg

10031489438742.jpg

10031529575391.jpg

Area the french drain is going into.
10031589703906.jpg

10031609761434.jpg

10031689835306.jpg

Lotsa of lifting
10031719931518.jpg

Bill; let's put it there...
Rick; No let's put it there....
Elyse; It's Saturday, why am I here....

Seriously, everyone rocked that day ( no pun intended) and things went very smooth with lots of work done.
 
10031820281496.jpg

Filling in the ditch for the french drain. This will built higher than grade. Basically a rock berm.
10031850462261.jpg

First layer of the drain.
10031860559888.jpg

Had to harden on each side of the drain to keep the mud from sluffing back into the ditch while we dumped rock.
10031970743958.jpg

10032000845505.jpg

Try as we might, we could not bury Kev Zuk. (would have made a great obstacle) :fawkdancesmiley:
10032101013924.jpg

Naw that's ok Bill, we got it. :D
10032111096306.jpg

Little better shot of the drain. Oh and Bill supervising :fawkdancesmiley:
 
Had to post this one...almost forgot it.:booo:
10031751369966.jpg

Uncle Stripey; Dang that's not easy pulling cable....
Elyse; So, are you Kevin's winch bitch now? Huh are ya huh?:fawkdancesmiley::haha:
 
Back
Top