Another lil something.....

crash2 · Mar 17, 2016

So before the wiring can get underway I had to resolve the driver side coil pack issue. Due to how the header is done the stock coil pack mount isn't even an option (I won't even say how it was mounted before

uke

.

So I came up with these mounts and they should do the trick.

crash2 · Mar 17, 2016

Now for my favorite part :cheer:

crash2 · Mar 20, 2016

So I got the engine side of the wiring all redone--it fits MUCH better now..

crash2 · Mar 20, 2016

This is what came out of that "ready to run" thinned harness

crash2 · Mar 20, 2016

I really don't understand the reasoning for this. Way up front of the car using the oil filter housing for the tap for the oil pressure gauge.

crash2 · Mar 20, 2016

Stock oil pressure tap. Well protected and very close to the guage.

crash2 · Mar 20, 2016

I pulled the tap off the filter and plugged it and got an adapter with a "much" shorter line.. This should be much better and one less thing to try and run down the chassis...

crash2 · Mar 22, 2016

This is the part I love about these projects.....

I got the electrical center all done.

crash2 · Mar 22, 2016

I got the dipstick tube mounted..

crash2 · Mar 22, 2016

Time to get this mess fixed up--they been a bugging me. :redneck:

crash2 · Mar 22, 2016

So I ended up making some brackets to hold the hoses.. Its pretty secure now and as far away from anything as it possibly can be.

crash2 · Mar 22, 2016

Time to head into uncharted waters :haha:

PORTER · Mar 22, 2016

Nice Mike, always have appreciated your attention to the little details.

crash2 · Mar 23, 2016

My brain must work different--I just look at things differently and always see those small things.

thanks mike.

crash2 · Mar 27, 2016

So I bent up the center console piece.

crash2 · Mar 27, 2016

So after I got it bent up I realized the shifter mount needed to be revamped. For one just the 2 small tabs made it flimsy and also didn't allow the sheetmetal to hug the hole for it.

crash2 · Mar 27, 2016

So I totally revamped it thats much stronger and will allot the sheetmetal to hug it much better.

crash2 · Mar 27, 2016

It took quite a bit of work to get the panel to this point--it was rather tricky but I was able to do it in one shot without having to remake it..:cheer:

crash2 · Mar 27, 2016

I got the switch pod made--another fun learning adventure with the brake..

crash2 · Mar 27, 2016

I got all the cross supports done.

Another lil something.....

-Oh no I picked a side-

Attachments

-Oh no I picked a side-

Attachments

-Oh no I picked a side-

Attachments

-Oh no I picked a side-

Attachments

-Oh no I picked a side-

Attachments

-Oh no I picked a side-

Attachments

-Oh no I picked a side-

Attachments

-Oh no I picked a side-

Attachments

-Oh no I picked a side-

Attachments

-Oh no I picked a side-

Attachments

-Oh no I picked a side-

Attachments

-Oh no I picked a side-

Attachments

Well-Known Member

-Oh no I picked a side-

-Oh no I picked a side-

Attachments

-Oh no I picked a side-

Attachments

-Oh no I picked a side-

Attachments

-Oh no I picked a side-

Attachments

-Oh no I picked a side-

Attachments

-Oh no I picked a side-

Attachments