Rockwell rebuilding?

mudslayer · Jan 22, 2019

Anybody know of a shop that rebuilds Rockwell center sections? We use Rockwell rearends mated to 100hp electric motors on our mixers at work to drive the agitators. We have 2 that need rebuilt and everything were finding is out of state.

boardbysled · Jan 23, 2019

https://hdtransaxle.com/

Might be able to help. I know lots of guys with oddball diffs from logging equipment use him.

CHOP SHOP · Jan 23, 2019

mudslayer said:
Anybody know of a shop that rebuilds Rockwell center sections? We use Rockwell rearends mated to 100hp electric motors on our mixers at work to drive the agitators. We have 2 that need rebuilt and everything were finding is out of state.

I can refurb or furnish you with replacements.

Whats wrong with the ones you have?

The last pair I built went to Top Truck Challenge with 500hp.

POR · Jan 23, 2019

CHOP SHOP said:
The last pair I built went to Top Truck Challenge with 500hp.

Dont listen to this, its all lies!!! Choppy must have started drinking or something.. toyotas don't make 500hp :haha:

mudslayer · Jan 23, 2019

CHOP SHOP said:
I can refurb or furnish you with replacements.

Whats wrong with the ones you have?

The last pair I built went to Top Truck Challenge with 500hp.

I believe pinion bearings are bad, but not sure, gears seem to be ok, and the other is still in use, but is growling pretty bad.

CHOP SHOP · Jan 23, 2019

Top loader or front loading? DIff on top of the axle or in front like a normal toyota/9"ford??

mudslayer · Jan 23, 2019

CHOP SHOP said:
Top loader or front loading? DIff on top of the axle or in front like a normal toyota/9"ford??

In front like a 9"

CHOP SHOP · Jan 23, 2019

Gotcha. I only have parts and build top loaders.

The diffs you have are much more common. If good used ones are acceptable then I would look at medium duty rigs like Internationals for a replacement diff.

Otherwise I would contact Pacific Powershifts. They should take care of you. In the Tacoma/Fredrickson area.

http://powershifts.com/

mudslayer · Jan 24, 2019

CHOP SHOP said:
Gotcha. I only have parts and build top loaders.

The diffs you have are much more common. If good used ones are acceptable then I would look at medium duty rigs like Internationals for a replacement diff.

Otherwise I would contact Pacific Powershifts. They should take care of you. In the Tacoma/Fredrickson area.

http://powershifts.com/

:awesomework: thanks!