full hydro with SOA

cutngut · Feb 2, 2013

Newbie here.....im wanting to run a double ended steering cylinder on my rig.
I have a d60 with leafs and was jus wandering the best way to mount the ram.
Thanks

1993toy · Feb 2, 2013

Do you have high steer? What kind of springs, how much lift?

Krobbie · Feb 2, 2013

Re: full hydro with SOA

Why run full hydro on leaf sprung?

Elliott · Feb 2, 2013

Krobbie said:
Why run full hydro on leaf sprung?

Cause that's what you do if you want to get in the woods and beat on ****!

1993toy · Feb 2, 2013

Re: full hydro with SOA

Krobbie said:
Why run full hydro on leaf sprung?

Why not?

Krobbie · Feb 2, 2013

Re: full hydro with SOA

Easier just do push pull and high steer

cutngut · Feb 3, 2013

I do have high steer arms. Its SOA lift.

cutngut · Feb 3, 2013

The SOA lift is what makes it a bit of a challenge.
Was just curious if anyone has this setup

mdo817 · Feb 3, 2013

It isn't to bad, I used 2X2X1/4, a piece of plate with angle welded to it to bolt on to the 2X2 which is welded to the axle.

cutngut · Feb 3, 2013

Cool deal man!! Is it working good for ya?

mdo817 · Feb 3, 2013

cutngut said:
Cool deal man!! Is it working good for ya?

Yea man it has worked great for me. We first set this type mount up a full width D44, I ran it for several years, Did the same thing here on the 60, It only takes a few minutes to pop the ram off to get in the dif. I can get you some more pictures if you need or want them.

Here is a picture of the same set up on the D44