DANA 300Transfercase help?

MuleSkinner1399 · Aug 27, 2014

Anyone ever worked on one? My right stick (front axle controller) slips out of gear easily. I know they have some sort of bearings that hold it in gear but to be honest I don't know much more than that. If anyone can tell me what part\parts I should be going for it would be appreciated.

MuleSkinner1399 · Aug 28, 2014

Re: DANA 60 Transfercase help?

Pic

TBItoy · Aug 28, 2014

Re: DANA 60 Transfercase help?

Dana 300 tcase you mean....

Stronger shifter detent springs http://www.jbconversions.com/products/dana300/ballspring.php

The engagement teeth on the gear/shaft/collar can get worn and let it jump gear also.

MuleSkinner1399 · Aug 28, 2014

Re: DANA 60 Transfercase help?

TBItoy said:
Dana 300 tcase you mean....

Stronger shifter detent springs http://www.jbconversions.com/products/dana300/ballspring.php

The engagement teeth on the gear/shaft/collar can get worn and let it jump gear also.

Ha. Yeah im not sure why I put 60. Changed it!

Thanks for the info!!

Bedgood · Aug 28, 2014

Yep, when I did low max 4-1 gears I ground me existing shift rail to match new one and it was completely divorced. Then I did the ball and dentent spring as mentioned above and it made a lil harder to shift but never popped again after that. If you buy job conversion as I did it comes with step by step instructions, pretty easy!! :dblthumb: