Firewall buggies and full bodied wheelers

AllGoNoShow · Feb 22, 2015

I love the full blown buggies just as much as the next guy. I like to see the homebuilt stuff too. Lets see some of the lower budget firewall buggies and full bodied rigs that get wheeled hard. Here is my fullsize 3 seater Ford. I am really thinking hard about cutting off a lot of sheet metal and adding a bench seat to fit my 3 kids, boatsides, and new cage. The truck is a Propane big block Ford with a C6, 203/205 with triple sticks. D60 stuffed with 4.10's, locker, RCV's, gusseted C's, and Solid knuckles. The rear is just a 10.25 with 4.10's and a welded diff. Homemade 1/4'' wall dshafts and 1410 joints throughout. 44'' boggers on H1 double beadlocks. Full belly skid. Doved front and rear with 3 suspension seats and harnesses.

This was before I narrowed the front.

jccarter1 · Feb 22, 2015

It get beat on pretty hard

sledneck · Feb 22, 2015

AllShowNoGo don't cut anything that's a bad as rig. Luv them old Fords.

nhl_bullitt · Feb 22, 2015

98 cherokee, that is literally a firewall buggy. Haha. 1986 Ford 1 tons w/ 5.13s, still has 4.0. 114" wb and 2.5 shocks.

AllGoNoShow · Feb 22, 2015

sledneck said:
AllShowNoGo don't cut anything that's a bad as rig. Luv them old Fords.

Thanks, the only reason for cutting would be to add the bench seat. I would still have the front clip and cowl. I was thinking of lowering the seats a little, building a cage, and chopping the chop a couple inches. Would incorporate the roof, but it would not have any of the rear cab left so that the rear occupants have a place to put their feet. It weighs 5720 full of fuel, tools and a high lift jack. If the kids aren't with me, add another 100 lbs of beer and ice.

1tonrenegade · Feb 23, 2015

Almost original! :****:

pholmann · Feb 23, 2015

I'll play. 93' ranger tons 4.0, np435/205 twin sticked, 5.13 gears bla bla bla

Stretch · Feb 23, 2015

My turdbox. Just back from getting the internal cage knocked out at M&M Fab.

TBItoy · Feb 23, 2015

4runner 4 seater

smurfy90 · Feb 23, 2015

Here is my budget buggy/family 4 seater trail rig. Was a 80 yota with a trashed body. Has 20r with a weber carb and smokes a lil.

From this

To this

sleepsontoilet · Feb 23, 2015

Firewalled Zuk with a few feet of frame left:

built 1.3L/5speed/6.5 case/60 front fab9 rear with 6.20s/39" reds

nhl_bullitt · Feb 23, 2015

I love checking out all these rigs. :smoke:

TBItoy · Feb 23, 2015

Trailabite · Feb 23, 2015

05 TJ

poolman · Feb 23, 2015

Awesome! I really like checking out these rigs! :woot:

TheMonster77 · Feb 23, 2015

1989 Chevy Z71, throttle body 350, 700r4, NP241, ZF planetary axles, 54 boggers, trailready beadlock wheels

ranger11 · Feb 23, 2015

89 ranger 60/14 203/1354 doubler 4.56s 42s have a 5.0 in it now plan to swap a 351 soon.

pholmann · Feb 23, 2015

Lots of ford love on this thread. Ford power bygawd!!

bamatoy · Feb 23, 2015

my old yota firewall rig

offroadohio · Feb 23, 2015

Re:

This was my first attempt at any sort of tube work. I was 20 years old.

Basically a stock tracker with hood firewall and windshield frame.

This is my current full bodied yota.

And just Becuase so many fords.

This was one of my many bronco iis

sent on tapatalk

Firewall buggies and full bodied wheelers

Well-Known Member

Well-Known Member

Well-Known Member

Southern IL/MO

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Southern IL/MO

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Active Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member