-
Help Support Hardline Crawlers :
Whats a good fairly inexpensive tire groover?
- Thread starter pholmann
- Start date
pholmann
Well-Known Member
A buddy of mine was telling me about this method the other day. I am looking for a little less cut. lol
pholmann
Well-Known Member
I may have to look into that for certain size cuts. Thanks for the info.
tonybolton
Bypass Crawler
I just about finished both of my rears(i've just been piddlin' on it here and there when I visit my parents).
I'm certainly getting better and faster with the wood chisel/torch method. I think my initial problem was not enough heat and not heating more of the blade. It's noticeable on my tread block cuts. On my first ones, it looks like a rabbits been nibblin' at'em. The ones I got to last night are more flat with only 2 scrape runs.
To finish both rears, i'll need to take it off the trailer. I've rolled it forward and backward as much as I can to easily get to the lugs. Theres prolly a section about a foot long on each tire that I just cant get the angle on while its on the trailer.
I'm certainly getting better and faster with the wood chisel/torch method. I think my initial problem was not enough heat and not heating more of the blade. It's noticeable on my tread block cuts. On my first ones, it looks like a rabbits been nibblin' at'em. The ones I got to last night are more flat with only 2 scrape runs.
To finish both rears, i'll need to take it off the trailer. I've rolled it forward and backward as much as I can to easily get to the lugs. Theres prolly a section about a foot long on each tire that I just cant get the angle on while its on the trailer.
tonybolton
Bypass Crawler
Re: Re: Whats a good fairly inexpensive tire groover?
17lb bucket o' rubber later....I'm done.
17lb bucket o' rubber later....I'm done.
hjpcummins
Well-Known Member
- Joined
- Oct 11, 2011
- Messages
- 1,510
Re: Whats a good fairly inexpensive tire groover?
I used a makita multi tool worked well.. Iv also done the elec chainsaw . Not as clean as the multi tool but was 10x faster
Sent from this bust'd ass iPhone
I used a makita multi tool worked well.. Iv also done the elec chainsaw . Not as clean as the multi tool but was 10x faster
Sent from this bust'd ass iPhone
Eddyj
Well-Known Member
John Galbreath Jr.
38 Special & Solo Buggy
- Joined
- May 24, 2007
- Messages
- 8,613
Eddyj said:
I suggest you using these for an 8" grinder. Hate for you to die a slow death.
the_white_shadow
Well-Known Member
- Joined
- Dec 25, 2014
- Messages
- 816
Just bought one of these. How does one keep the blade from spinning on itself? At full tilt it works fine but as soon as you put some pressure on the tire the blade just spins and doesn't really cut anything. Any tips for those that have used it?
Eddyj
Well-Known Member
I take back all the bad things Ive ever thought about Casey while reading his post. ( some of them are hard as hell to follow :****: )
But he found a winner with this. Quite possibly the easiest way to grove a tire. I might even do some fancy cut now.
You probably have the chain in backwards. Mine was installed backwards out of the package I had to flip it over.
Seriously if anybody's thinking about grove tires this is by far the easiest way to do it I would recommend the guard to control your depth
But he found a winner with this. Quite possibly the easiest way to grove a tire. I might even do some fancy cut now.
You probably have the chain in backwards. Mine was installed backwards out of the package I had to flip it over.
Seriously if anybody's thinking about grove tires this is by far the easiest way to do it I would recommend the guard to control your depth
the_white_shadow
Well-Known Member
- Joined
- Dec 25, 2014
- Messages
- 816
So in the pic you have posted above, the chain is backwards? That's the way I have it mounted now. It works just slips on the guide and doesn't work very well. I'll try flipping it around and see what happens.
Eddyj
Well-Known Member
When I open my package it all fell out on floor. When I put it back together it was in backwards. It cut kind of. But when I flipped it over it cut through it like butter. I haven't put the depth guard on it yet. E
joho75287
Well-Known Member
I just grooved mine with an electric chainsaw two evenings ago. Worked great and had all 4, 43" TSL SX (non stickies) done in just over an hour.
joho75287
Well-Known Member
Re: Whats a good fairly inexpensive tire groover?
Pic of chainsaw handiwork
Sent from my iPhone using Tapatalk
Pic of chainsaw handiwork
Sent from my iPhone using Tapatalk
hjpcummins
Well-Known Member
- Joined
- Oct 11, 2011
- Messages
- 1,510
Re:
Iv done the same with a HF electric chainsaw. Quick n easy. I plan on trying out their chain grinder attachment.. if I can get results like kush I'll be plenty happy
Iv done the same with a HF electric chainsaw. Quick n easy. I plan on trying out their chain grinder attachment.. if I can get results like kush I'll be plenty happy
tonybolton
Bypass Crawler
Re: Whats a good fairly inexpensive tire groover?
I'm trying the 20volt electric chainsaw out.
On sale at Walmart for 97 bucks and figure mom can use it on the yard if she needs to.
It's light...seems to cut decent. Just going to do that single line chevron cut like others. No whole lug cutting like on old tsls.
I'm trying the 20volt electric chainsaw out.
On sale at Walmart for 97 bucks and figure mom can use it on the yard if she needs to.
It's light...seems to cut decent. Just going to do that single line chevron cut like others. No whole lug cutting like on old tsls.
