rpf500
Well-Known Member
This is insignificant tech compared to most of what's posted here but I stumbled on this today and decided to try it. 15 minutes and free. If you drive a GM truck or SUV, you know the front seats don't recline for ****. When we travel to wheel somewhere wife always complains she can't sleep. I just figured there was nothing I could do, but I now know there is.
I used a die grinder on the brass ring seen below. Just take your time. If you mess up the threads on the rod, you have a problem. Notice the position of the armrests. That's both seats all the way back, before I did passenger side.
I used a die grinder on the brass ring seen below. Just take your time. If you mess up the threads on the rod, you have a problem. Notice the position of the armrests. That's both seats all the way back, before I did passenger side.
![EHCT9062[1].JPG](http://attachments.www.hardlinecrawlers.com/xfmg/thumbnail/12/12343-4c282e33a82830f1c2360e8c9962fb30.jpg?1625929664)
