my mistress buggy build

kody29 · Apr 17, 2016

halcat said:
You will love that steering cylinder. I don't know if I would trust that mount tho. PSC clamp will fit it for a double mount. My .02

Ya I called psc awhile back about ordering some clamps but they weren't very helpful cause it wasn't a psc ram but I need to measure it and order some then thanks for the info.

RebelRider · Apr 17, 2016

No need for clamps. Just weld some small flat bar just inside the mounts themselves. This will take the load off of the bolts. I've had zero issues out of mine that way on 44s. The bolts will then just basically be holding the ram down.

kody29 · Apr 17, 2016

RebelRider said:
No need for clamps. Just weld some small flat bar just inside the mounts themselves. This will take the load off of the bolts. I've had zero issues out of mine that way on 44s. The bolts will then just basically be holding the ram down.

OK great thanks for the advice

halcat · Apr 17, 2016

It's not the bolts I was worried about. The mount is welded to the thin wall cylinder right at the end (seal area). Without it being clamped from the top, I thought it would distort the cylinder and cause a leak. I guess I worried for nothing.

kody29 · Apr 18, 2016

Ordered new shifter today thanks Matt Christian

kody29 · Apr 20, 2016

Did something different with the dash what you think

Dillehay · Apr 21, 2016

nice shifter......got any info?

Rokcrler · Apr 21, 2016

Shifter is badass!
http://moab-4x4.com/
Steve Nantz built

kody29 · Apr 21, 2016

Yes call the guys at mad 4x4 outpost mine will show up today it looks bad ass. I'm running an art Carr from my old buggy but it's too bulky for new one so went this route.

kody29 · May 4, 2016

Okay I need some help on where to mount my rear steer joystick any pictures ideas would be great don't have too much room and wanted to be easily accessible here is a pic of the dash and what I have so far

kody29 · May 7, 2016

Radiator finished up and dash mocked up

kody29 · May 7, 2016

Radiator finished up and dash mocked up

kody29 · May 7, 2016

Did a couple little things today

Beerj · May 7, 2016

Lookin good :dblthumb:

kody29 · May 23, 2016

Little more work done getting closer

kody29 · May 23, 2016

Few more pics

kody29 · Sep 20, 2016

OK haven't posted in a while final assembly began

kody29 · Sep 23, 2016

It's rolling now going to try and wire it this weekend

kody29 · Sep 29, 2016

Tried to flex it some

my mistress buggy build

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Attachments

Sonzabitches!

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Attachments