Project Corndog 96 xj

Turfmode · Nov 7, 2019

This is my first build. I'm working in my 96 XJ. I've got seats working on bumpers and tow points roll cage to come soon. It's got 35in buckshots. Any advise would be appreciated.

The Luke · Nov 7, 2019

Shackle relocators. Freed the rear ended of mine up a ton. The stock angle was garbage.
And lots of frame stiffeners. Hooligan Offroad makes some that wrap the frame. Most everyone else just plates the outside.

ridered3 · Nov 7, 2019

Steering box brace for sure if the unibody/frame stiffeners do not already address the steering box.

Interesting Project Name. How did you come up with that?

Turfmode · Nov 7, 2019

ridered3 said:
Steering box brace for sure if the unibody/frame stiffeners do not already address the steering box.

Interesting Project Name. How did you come up with that?

I'm ordering the steering box brace tomorrow and I made plates for the outter side of the unibody for the steering box and its tied into the bumper I'm making.

I came up with the name with my buddy Eddyj. I made the money I bought it with and am building it with making corndogs.

ridered3 · Nov 7, 2019

Sounds good on brace and the name. It's a wonder Eddyi didn't have you name it "Project Bearded Lady."

Turfmode · Nov 7, 2019

Lol we didnt wanna name it after my mom.

84mallcrawl · Nov 7, 2019

Don't make the mistake of tearing the whole thing apart to "build it right the first time" .
Embrace the redneckory and get out in the woods and enjoy what it is.

TBItoy · Nov 7, 2019

84mallcrawl said:
Don't make the mistake of tearing the whole thing apart to "build it right the first time" .
Embrace the redneckory and get out in the woods and enjoy what it is.

x2

if you want a "better/built/badass" rig, then ride the beater while you save up to buy a better rig.
Much more fun than having a took apart never ending project sitting in the garage.

Eddyj · Nov 7, 2019

We are going to do a little safety first.
Suspension seats, harness and roll bar. Then beat it

Turfmode · Nov 7, 2019

84mallcrawl said:
Don't make the mistake of tearing the whole thing apart to "build it right the first time" .
Embrace the redneckory and get out in the woods and enjoy what it is.

I will definitely embrace the redneckory.

Lil ugly · Nov 7, 2019

TBItoy said:
x2

if you want a "better/built/badass" rig, then ride the beater while you save up to buy a better rig.
Much more fun than having a took apart never ending project sitting in the garage.

This right here is the best advice so far. I am and have been in build mode way too long and have missed a lot of wheeling because of it.

Turfmode · Nov 7, 2019

Lil ugly said:
This right here is the best advice so far. I am and have been in build mode way too long and have missed a lot of wheeling because of it.

Yea I agree. I'm just cleaning up some wiring and some safety precautions then I'm gonna take it out.

xjcrawler · Nov 7, 2019

Must Do Revolving Shackles For Superb Wheeling Abilities!!!!

Big David · Nov 7, 2019

If it doesn't have them, t case & gas tank skids. You can get stock ones at the junk for about $30 each. They are pretty durable.

extremetownie · Nov 7, 2019

Andy at https://www.ironman4x4fab.com/cherokee-xj really has some nice stuff .

Turfmode · Nov 7, 2019

Big David said:
If it doesn't have them, t case & gas tank skids. You can get stock ones at the junk for about $30 each. They are pretty durable.

The gas tank has one I'm gonna have to get the tcase

MonnlightRacing77 · Nov 9, 2019

Been said but frame stiffners and steering box brace.Ironman make a really nice finished piece.boostwerks makes a DIY for around 160.

Turfmode · Nov 9, 2019

I ordered a steering brace from rustys offroad. And I think I'm gonna wait on the frame stiffners. This isnt along term rig and I dont know if they will be worth the money or time

Turfmode · Nov 22, 2019

Went on my first ride last weekend after starting a roll cage and installing a steering brace.

Made it back on the trailer under my own power. All and all it was a great day. Made it up the right side of the ledges and stoney.

Eddyj · Nov 22, 2019

I forgot to tell you that you can't post any pics with the "other" guy that was with us. It's a long story but we're not allowed to speak his name here anymore...
#neverforget
#bye
#fatallybutthurt