• Help Support Hardline Crawlers :

the new fattness...

Comet said:
If you use that tank I would put at least two fuel pick ups in there, maybe more. APE in Texas sells them. But if it was me, I'd just use your Bronco tank. Is there a reason you can't?

the 'accumulator tank' would get me around having to have mulitple pickups...and I think be more reliable/flexible.
the bronco tank....well, the one I've been running lately is too small (20 gallons)...as the old big one has just been beaten to badly (too many holes to fix at this point).....and just generally-all-around hard to mount cleanly and have it look good.....and it too has issues of starving for fuel if it gets much under 1/3 tank....
 
Funny I saw that same tank/storage

I wouldnt use it. When I had my normal fuel cell with no pickups I tired to make an accmulator. It didnt work out too good. Still ran out of fuel here and there. I ended up making my own cell and running the pickups.
 
Erik D_lux said:
Funny I saw that same tank/storage

I wouldnt use it. When I had my normal fuel cell with no pickups I tired to make an accmulator. It didnt work out too good. Still ran out of fuel here and there. I ended up making my own cell and running the pickups.

so you're running the 'multiple pickups'....like the ones that holley (used?) to make.....w/ the wierd little check valves that will close when open to atmosphere??....
where'd you get them....I can't find them listed anywhere anymore...
 
Berne maybe try a boat shop for the multiple pickups with check valves. like a bigger boat shop, tug boats and such. they have large and sometimes multiple fuel tanks with cross over systems.

even my 22 footer has a 60 gallon alum tank with front and rear pickups but i have never had it apart so i dont know about the internal pickup system.

or maybe airplane stuff?
 
OK....more pics....

took some just random pics last night before I closed up my shanty....


general "pics of my huge shop"....
 

Attachments

  • shop_1.JPG
    shop_1.JPG
    35 KB · Views: 238
  • shop_3.JPG
    shop_3.JPG
    24.8 KB · Views: 249
  • shop_4.JPG
    shop_4.JPG
    34.2 KB · Views: 242
  • junk_2.JPG
    junk_2.JPG
    35.6 KB · Views: 250
ok.....I actually did a little bit of work too....

more x-member work....getting closer...
 

Attachments

  • x_member_5.JPG
    x_member_5.JPG
    33.2 KB · Views: 238
  • belly_1.JPG
    belly_1.JPG
    33.3 KB · Views: 234
  • belly_2.JPG
    belly_2.JPG
    27.8 KB · Views: 225
closer.....

(BTW, drilling 3/4" holes through 3/8" plate sucks ass)
 

Attachments

  • x_member_4.JPG
    x_member_4.JPG
    25.7 KB · Views: 231
  • x_member_2.JPG
    x_member_2.JPG
    31.2 KB · Views: 229
  • x_member_3.JPG
    x_member_3.JPG
    23.5 KB · Views: 234
the next tab in line.....

I'll get this finished tonight...
 

Attachments

  • x_member_1.JPG
    x_member_1.JPG
    35 KB · Views: 229
OH ya....


and......here's my secret weapon...
 

Attachments

  • helper_1.JPG
    helper_1.JPG
    27.5 KB · Views: 233
  • helper_2.JPG
    helper_2.JPG
    28.7 KB · Views: 227
Berne said:
OH ya....


and......here's my secret weapon...

ummm amber...your boobies are dirty.

are you doing this at Hughs place?

bernie you could always use some jack stands instead of the wife to hold that chasis up.

looking really nice bern.
 
Hip said:
are you doing this at Hughs place?

bernie you could always use some jack stands instead of the wife to hold that chasis up.

looking really nice bern.


this is all going down in my garage....
we've been building Hugh's new shop over the last month or so too.....concrete is coming next-next weekend.....then skin and doors on the front wall and electricity, and its full awn over there...

my garage is too small, but w/ some careful layout, can be amazingly functional......its really big enough to do everything I'm doing to this thing....except bend tube inside...

and, amber is bracket master.....she makes patterns out of Hamms and Highlife boxes......I cut them out w/ the torch, and she finishes/fits them...
she's getting pretty damned good at it...
 
So..... ya going to put some bitch seats in the bed of the M715 so your friends have someplace to ride? Kinda glad you went with that cab in the end, even if the Scout had some things going for it.

Edit: Is that Erik's old truck in the driveway?

Oh, and WTF is this??
 

Attachments

  • x_member_4.JPG
    x_member_4.JPG
    47.3 KB · Views: 201
Last edited:
saf-t scissors said:
Oh, and WTF is this??


THAT.....would be the pile of shitty bear in the corner, the Natty Ice, there's some Busch light, and out of view I believe there is some Milwaukee's Best Ice also....

thats the beer that other people bring over, then drink my beer in the fridge, and leave their's....thinking that was a 'fair trade'....

:redneck:
 
saf-t scissors said:
So..... ya going to put some bitch seats in the bed of the M715 so your friends have someplace to ride? Kinda glad you went with that cab in the end, even if the Scout had some things going for it.

Edit: Is that Erik's old truck in the driveway?


and for the seats.....well.....its gonna be tight back there....

so....I've come up with another solution....

retractable tug lines.......like water ski ropes, that self retract when not in use......and then some storage somewhere for some 'off-road skateboards'....

really shawn, trust me, it'll be sweet!!!



and ya, Erik's old bronco is now Melon's bronco....but it lives at my house......
and has 38's on it now...
 
Back
Top