• Help Support Hardline Crawlers :

Am I a buggy yet?

dobber

dobber

Well-Known Member
Joined
Apr 10, 2006
Messages
460
Location
Cosmopolis, WA

Attachments

  • chads trucks 151.jpg
    chads trucks 151.jpg
    62.2 KB · Views: 376
  • chads trucks 153.jpg
    chads trucks 153.jpg
    72 KB · Views: 381
It's still got fenders and doors that appear to open, I'd call it a truggy still, a very extreme truggy, but a truggy none the less. I start calling it a buggy when there are no more fenders at all and the doors disappear.
 
Truggy's have a portion of an existing vehilces frame rails. Buggy's are full tube or box frame construction.

You have a truggy.
 
Truggy, always will be. It started off life as a truck and was built around the foundation of a truck. Even when every single truck part is gone it will still be a truggy.
 
Binder said:
Truggy, always will be. It started off life as a truck and was built around the foundation of a truck. Even when every single truck part is gone it will still be a truggy.
Click to expand...

Sort of like how it's still a Jeep after the engine, transmission, transfer case, drive shafts, axles and steering have been replaced? :D
 
ToyBug said:
Truggy's have a portion of an existing vehilces frame rails. Buggy's are full tube or box frame construction.

You have a truggy.
Click to expand...

x2 on this one. And I see lots of frame left. Plus functioning doors and fenders.
 
ToyBug said:
Truggy's have a portion of an existing vehilces frame rails. Buggy's are full tube or box frame construction.

You have a truggy.
Click to expand...

So this must be a truggy too, it's got 4 feet of toyota frame.
 

Attachments

  • DSI031.jpg
    DSI031.jpg
    58.3 KB · Views: 321
GRNTACO said:
:haha: I meant why waste the time by using 4' of Toy frame.
Click to expand...

The early legend's class rules of UROC were not clarified too well, they used the toy frame back to the vin number, to be sure the buggy would be legal. that's why the time was wasted using a piece of toy frame, that and the dimension's were right for the application.
 
Jobless said:
They needed that chunk of recycled metal so as to fit in with the WE Rock rules for the class it would be running.
Click to expand...

I see now.....

darius said:
The early legend's class rules of UROC were not clarified too well, they used the toy frame back to the vin number, to be sure the buggy would be legal. that's why the time was wasted using a piece of toy frame, that and the dimension's were right for the application.
Click to expand...

Gotcha.:awesomework:
 
In my opinion what really sets truggies apart from buggies is basically height. Not the overall height of the vehicle but the height of the way the components are layed out. Relation to the chassis and powertrain to the driver. Most truggies started out as something where the driver set upright with bent knees and usually poor visibility over the hood as a direct relation of the height of the components. As the rig goes through stages and is modified rarely does this height relation change much if at all. When all done the truggy still has a driver that sits upright with knees bent and crappy visibility. Therefore given a even height of the belly pan the truggy will almost always be taller and probably more unstable..........
Then if there's toy parts involved it's just plain crap no matter how you try to smoothe it over.:haha:






I had to throw in that last part just forthe :stirpot: factor.:awesomework:
I'm in a argumentive mood.
http://www.pirate4x4.com/forum/showthread.php?p=7125438&posted=1#post7125438
 
Last edited:

Latest posts

Random media

IMG_1381.jpg
CAM03014.jpg
Rookie Kyle.jpg
IMG_5433.jpg
Mark6.jpg
Picture 047.jpg
Lawrimore Trailer with Rock Crawler 2.jpg
IMAG0344.jpg
image.jpg
Back
Top