Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
I hope this isn't taken offensively I went at this a little different direction...2008 2500 hd rear rotors and caliper. This way the hub is all that needs machine work, I had to turn the hub down to 4.83" to fit the center hole of the Chevy rotor (figured this may solve a problem down the road with wheel center clearance?) also I drilled my hubs to 8x6.5 pattern. I don't have the calipers and brackets yet so haven't gotten to the point of making the caliper bracket adaptor yet as soon as I do I'll post up.
I hope this isn't taken offensively I went at this a little different direction...
2008 2500 hd rear rotors and caliper. This way the hub is all that needs machine work, I had to turn the hub down to 4.83" to fit the center hole of the Chevy rotor (figured this may solve a problem down the road with wheel center clearance?) also I drilled my hubs to 8x6.5 pattern. I don't have the calipers and brackets yet so haven't gotten to the point of making the caliper bracket adaptor yet as soon as I do I'll post up.
