1350 yoke

[oneshot]

Does anyone have a part number for a 1350 yoke for the rear output on a dana 300. Ive read that you can use a d44 yoke, but Randys says that they are different and they dont sell yokes for 300's.

 

[Outback]

Does anyone have a part number for a 1350 yoke for the rear output on a dana 300. Ive read that you can use a d44 yoke, but Randys says that they are different and they dont sell yokes for 300's.

Six States...

 

[Cascade_Crawler]

A D44 1310 yoke will work on a 300. Dont see why a 1350 wouldnt. Pick one up and see, can always return it :haha:

 

[darius]

Randy's is clueless:fawkdancesmiley: You say 300, they say nope, don't have it

 

[crash2]

Yes-- a stock output is the same as a 44 (spline wise)-- so just get a dana 44 yoke for a 1350 and your set....

 

[oneshot]

Do you use the stock out put seal with a yoke for a 44?

 

[Cascade_Crawler]

Do you use the stock out put seal with a yoke for a 44?

Yes - use the stock 300 seal

you just didnt talk to the right person at randys :redneck:

EDITed for clarity

 

[oneshot]

Thats funny, I thought the same thing the first time I called, so I called back about 2 hours later, talked to another person and got the same misinformation.

 

[crash2]

I am pretty sure thay are the same seal size. Tried to find my old 300 tailshaft housing but could not find it--little rascel :redneck:

 

[Little Red Zuk]

Randy's is clueless:fawkdancesmiley: You say 300, they say nope, don't have it

Yes.

you just didnt talk to the right person at randys :redneck:

Some people at Randy's know.

 

[Lincolnlock]

Dana 30 yokes will work also. I've gone through a few on mine. Call six states in Portland. They will have what you need in stock. There are some seasoned dudes behind the counter that will know exactly what you need.

 

[darius]

Do you use the stock out put seal with a yoke for a 44?

The stock 300 output seal.