Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
yes its a balls housing. it said that in the 4wheeler article online like 3 months ago, and was to be released at EJS. AL third, remains to be seen. In standard rotation, I can't see ever having a problem. As long as the housing doesn't flex around that 3rd bearing in a coast side app, it should be fine. If there is any deflection at all, those gears will separate and lunch. I assume they know this and have addressed it. They need to cast both styles (if they can get a gear cutter to cut them) for a pinion on both sides of the ring for low and high in each app so you can be on the drive side regardless. Axles manufacturers are who need to step up, as well as locker makers for other spline counts (37 or 40 if in a dana pitch.)
yes its a balls housing. it said that in the 4wheeler article online like 3 months ago, and was to be released at EJS.
AL third, remains to be seen. In standard rotation, I can't see ever having a problem. As long as the housing doesn't flex around that 3rd bearing in a coast side app, it should be fine. If there is any deflection at all, those gears will separate and lunch. I assume they know this and have addressed it. They need to cast both styles (if they can get a gear cutter to cut them) for a pinion on both sides of the ring for low and high in each app so you can be on the drive side regardless.
Axles manufacturers are who need to step up, as well as locker makers for other spline counts (37 or 40 if in a dana pitch.)
