1934 Ford Three Window Coupe

[John Galbreath Jr.]

Looking for the above vehicle. Fiberglass okay if nice. Chevy motor and transmission required. Looking for a nice driver, do not need a detailed undercarriage show car.

 

[InDaShop]

Hunting same car '33-34 but a 5 window


JG- I have a buddy in LA with that '34 3w unrestored but complete driver, he was wanting $80k for it last time I was in his garage.
Hemmings, JalopyJournal, ebay. and the big swapmeets like Hershey, Pate, Roadster Show.

 

[InDaShop]

Its in Atlanta
http://www.jalopyjournal.com/forum/showthread.php?t=656172&highlight=1934

Connecticut
http://www.jalopyjournal.com/forum/showthread.php?t=626930&highlight=1934

 

[John Galbreath Jr.]

Thanks for the links. What I am looking for is a completely finished street rod. I am not looking for an original vehicle. I do want full fenders.

I realize this is oddball, especially for this site, but if anybody hears anything, let me know. Been looking on eBay and Stret Rod sites for about 4 months now.

 

[big_dodge]

What about something like this:

body is a 1930 5 window coupe chopped about 3-4" on top......Solid Steel body with NO rust

Rear end set up
Peter Jakes ladder bar setup
transverse buggy spring
1940 ford front spring in rear
rear end 1975 maverick 283 limited slip

front end 4 inch super bell
drop axle package (from honest charlies)
pan hard bar disc brakes
vega steering box, transmission mount (Brookville)
Brookeville frame with 2 inch kick up (bought at honest charlies)

floor pan, firewall, trunk, steering column, brake pedal, sbc and 350 turbo transmission both stock.....will sell with or without motor and tranny

Call or text me if interested, I don't get online much:

(865)617-Six.Two.Three.Zero Aaron

 

[John Galbreath Jr.]

Thanks, but I want a finished unit, not a project.

 

[gamjunior]

You have more than likely looked here but just in case here's a few I found on craigslist....

http://spacecoast.craigslist.org/cto/2779943246.html

http://atlanta.craigslist.org/eat/cto/2788658857.html

http://atlanta.craigslist.org/atl/cto/2769829288.html

http://atlanta.craigslist.org/wat/cto/2724224230.html

http://mobile.craigslist.org/cto/2727516885.html

http://memphis.craigslist.org/cto/2730125392.html

http://dallas.craigslist.org/dal/cto/2793669362.html

http://oklahomacity.craigslist.org/ctd/2745283391.html

 

[John Galbreath Jr.]

Thanks for looking for me. I had found all but one.

You have more than likely looked here but just in case here's a few I found on craigslist....

http://spacecoast.craigslist.org/cto/2779943246.html

Ford Powered

http://atlanta.craigslist.org/eat/cto/2788658857.html

Ford Powered

http://atlanta.craigslist.org/atl/cto/2769829288.html

Possible, looking for bucket seats, but that is an easy change

http://atlanta.craigslist.org/wat/cto/2724224230.html

I have been looking at this one, a little higher than I want to pay, but have not contacted to see how neg. he is

http://mobile.craigslist.org/cto/2727516885.html

No engine cowl, one of Nan's requirements

http://memphis.craigslist.org/cto/2730125392.html

Possible

http://dallas.craigslist.org/dal/cto/2793669362.html

I have been following this car, the interior is not up to where I want it

http://oklahomacity.craigslist.org/ctd/2745283391.html

Nan does not want yellow


Thanks again for being on the lookout.

 

[John Galbreath Jr.]

You have more than likely looked here but just in case here's a few I found on craigslist....


http://atlanta.craigslist.org/wat/cto/2724224230.html

Going to see this one tomorrow. He has come down $5,000.00.

 

[xjcrawler]

I got a buddy that can build whatever you want, Timeless Rods in Lula Ga.


http://www.timelessrods.com/public/AllCategories.aspx

 

[John Galbreath Jr.]

Bought one today. Will post up pics after I get it in the sunshine. Drove it back from Rome, GA. Drove good.

 

[Blase]

Congrats. Pictures are a must.

 

[InDaShop]

Steel or 'glass?

 

[John Galbreath Jr.]

Steel or 'glass?

Glass, just could not find steel in my budget.

 

[InDaShop]

Glass, just could not find steel in my budget.

oh dang I was totally unaware JohnG ever had a budget Cool, do a 'glass one this time, then when you are ready to get your next one step up to real Henry Ford stuff
Do you know who's 'glass it is? I've been around a Gibbons bodied car. Its real nice and I even asked him when I saw your quest if he was looking to sell and he wasnt.

 

[John Galbreath Jr.]

oh dang I was totally unaware JohnG ever had a budget Cool, do a 'glass one this time, then when you are ready to get your next one step up to real Henry Ford stuff
Do you know who's 'glass it is? I've been around a Gibbons bodied car. Its real nice and I even asked him when I saw your quest if he was looking to sell and he wasnt.

And I didn't ever think we would have a :afro: as a president either. It is a Street Beast boby. 89 Mustang front and rear end, custom chassis.

Here are some pics as requested:

 

[miles4areason]

BADASS

 

[InDaShop]

That car is clean!!!! Not my style, but I fully respect how clean it is. Nice!

 

[crawlin85cj]

Very clean. Love it! The '33 is on my bucket list, they make bad ass Sunday cruisers. Congrats

 

[Blase]

Very nice!!! I'm digging the flames.