Fuel tanks
A choice of fuel tanks.
So doing a 2RZ swap and I have the entire wiring harness, fuel system including fuel tank from the donor truck, this is all goin in my '82.
So I obviously need an EFI type tank so after pulling my '82 tank and comparing it to the 22re tank and the 2RZ Taco tank I'm looking at which will be the easier swap.
Using the:
RE tank will allow direct bolt in from the looks of it, then a modified fill tube and connecting the wiring to the Taco harness.
RZ tank will allow use of the Taco wiring and fuel lines, and is too long to fit.
So that leaves using the RE tank splicing in the RZ wiring pigtails. So now all I need to do is:
1: Figure out which wires are for what. That shouldn't be too difficult.
2: Figure out if the RE fuel sender will work with a Taco fuel gauge.
3: Bolts right up!?!?
Pics for the readers pleasure.
From to top to bottom, R-RE-RZ
And another view-from right to left RZ-RE-R
Option 3:
Put tank on left side of truck, build new mounts, make hole in box for filler. Run exhaust down right side and not worry about a crossover pipe clearing everything.??????????
