onetoncrawler
Well-Known Member
Sold!
Samurai Buggy for sale - finished up around April of this year
I hate to sell this buggy, it works great and is reliable - I'm going to try and race a little so I want to build something with more power
I just finished cutting the sides off the tub and putting aluminum skins on = pics are current
the samurai frame has been retained from the engine mounts to the rear of the seat
below are most of the specs - If you have any questions please feel free to shoot me a PM, call or text
price is $16,000 FIRM
would consider selling for less if I keep tires and wheels, winch, and tail lights
** notice ** the 20" light bar pictured will not come with the buggy, it will sell with 7.5" bar
• 1.6 tracker engine
o Low Range Offroad (LRO) header
o LRO GM Alternator bracket with new 1 wire alternator
o LRO pwr steering pump bracket with new Trail Gear 1650 PSI pump
o LRO billet aluminum pulleys
o New water pump
o New plugs, wires, distributor cap and button
o New distributor
o New starter
o Trail tough bombproof engine mounts
o Trail tough adapter plate to Samurai 5 spd trans
o Got propane kit – electric lockout
* Flowmaster exhaust
• Samurai transmission and transfer case
o Trail Tough Bombproof transmission mount
o 6.5 to 1 gear kit all new seals
o LRO Samurai to Toyota flange adapters
o LRO End of story (EOS) T-Case mount with 4 new OEM Suzuki transfer case mounts
• Prototype LRO full skid plate
• Fresh driveshafts – 2" x .25" wall material – Trail Gear creeper joint in front with spare creeper joint
• Barnes 4wd link brackets all around
• 7075 2" Lower Links with 7075 1.5" uppers
• Barnes 4wd ¾" heims with grade 8 ¾" bolts
* 39" BFG Baja KRT-B tires - only a couple months old
* 17x9" Raceline RT 232 aluminum wheels with polished aluminum rock rings
• Front Axle
o Dana 61 5.38 gears
o Yukon Spool
o stock 35 spl inners, Yukon 35 Spl Chromoly outers, Trail Gear drive flanges
o High Steer (arms aren't ideal but work well)
o New 1.625" x .312 wall tie rod with ¾" heims
o Barnes 4wd 3/8" diff cover
o GM ½ ton brakes with TMR custom caliper mounts (weight saving) all new pads and rotors
o New wheel bearings
• Rear Axle
o GM 14 bolt 5.38 gears
o Welded
o GM ½ ton brakes with TMR custom caliper mounts (weight saving) all new pads and rotors
o Barnes 14 bolt 13 bolt 3/8" cover
• Suspension
o 14" Fox Emulsion coilovers with PAC racing springs custom tuning by EOR
o 4 link front and rear
• Warn 9000lb winch with Custom Splice synthetic rope
• MasterCraft seats & PRP 3" padded 5 point harnesses
• MudPro Metalworks steering valve mount
• Longacre steering wheel with disconnect
• Window nets
• Stop , tail and running lights – ECORS/Dirt Riot legal
• 7.5" LED headlight
• LED rock lights
• Horn
• Will come with 2 propane tanks
Samurai Buggy for sale - finished up around April of this year
I hate to sell this buggy, it works great and is reliable - I'm going to try and race a little so I want to build something with more power
I just finished cutting the sides off the tub and putting aluminum skins on = pics are current
the samurai frame has been retained from the engine mounts to the rear of the seat
below are most of the specs - If you have any questions please feel free to shoot me a PM, call or text
price is $16,000 FIRM
would consider selling for less if I keep tires and wheels, winch, and tail lights
** notice ** the 20" light bar pictured will not come with the buggy, it will sell with 7.5" bar
• 1.6 tracker engine
o Low Range Offroad (LRO) header
o LRO GM Alternator bracket with new 1 wire alternator
o LRO pwr steering pump bracket with new Trail Gear 1650 PSI pump
o LRO billet aluminum pulleys
o New water pump
o New plugs, wires, distributor cap and button
o New distributor
o New starter
o Trail tough bombproof engine mounts
o Trail tough adapter plate to Samurai 5 spd trans
o Got propane kit – electric lockout
* Flowmaster exhaust
• Samurai transmission and transfer case
o Trail Tough Bombproof transmission mount
o 6.5 to 1 gear kit all new seals
o LRO Samurai to Toyota flange adapters
o LRO End of story (EOS) T-Case mount with 4 new OEM Suzuki transfer case mounts
• Prototype LRO full skid plate
• Fresh driveshafts – 2" x .25" wall material – Trail Gear creeper joint in front with spare creeper joint
• Barnes 4wd link brackets all around
• 7075 2" Lower Links with 7075 1.5" uppers
• Barnes 4wd ¾" heims with grade 8 ¾" bolts
* 39" BFG Baja KRT-B tires - only a couple months old
* 17x9" Raceline RT 232 aluminum wheels with polished aluminum rock rings
• Front Axle
o Dana 61 5.38 gears
o Yukon Spool
o stock 35 spl inners, Yukon 35 Spl Chromoly outers, Trail Gear drive flanges
o High Steer (arms aren't ideal but work well)
o New 1.625" x .312 wall tie rod with ¾" heims
o Barnes 4wd 3/8" diff cover
o GM ½ ton brakes with TMR custom caliper mounts (weight saving) all new pads and rotors
o New wheel bearings
• Rear Axle
o GM 14 bolt 5.38 gears
o Welded
o GM ½ ton brakes with TMR custom caliper mounts (weight saving) all new pads and rotors
o Barnes 14 bolt 13 bolt 3/8" cover
• Suspension
o 14" Fox Emulsion coilovers with PAC racing springs custom tuning by EOR
o 4 link front and rear
• Warn 9000lb winch with Custom Splice synthetic rope
• MasterCraft seats & PRP 3" padded 5 point harnesses
• MudPro Metalworks steering valve mount
• Longacre steering wheel with disconnect
• Window nets
• Stop , tail and running lights – ECORS/Dirt Riot legal
• 7.5" LED headlight
• LED rock lights
• Horn
• Will come with 2 propane tanks
- buggy does work great - I've been really please with the way it climbs and how it feels
