Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
The plugs look normal. No excessive build up etc.I have tested the switch and it was within spec. I replaced it with another one i had that tested good with the same results.So far when it's been cold it does this 95% of the time. But i went out yesterday and had it started in a minute or so. First i disconnected the cold start injector and cranked it for 4-5 seconds, which it didn't fire or even sputter. I then re connected the cold start injector and it fired up almost immediately. I've played with the CSI being plugged/unplugged before and it didn't make a difference. I'm going to try it again in a little bit and see what happens.
The plugs look normal. No excessive build up etc.
I have tested the switch and it was within spec. I replaced it with another one i had that tested good with the same results.
So far when it's been cold it does this 95% of the time. But i went out yesterday and had it started in a minute or so. First i disconnected the cold start injector and cranked it for 4-5 seconds, which it didn't fire or even sputter. I then re connected the cold start injector and it fired up almost immediately. I've played with the CSI being plugged/unplugged before and it didn't make a difference. I'm going to try it again in a little bit and see what happens.
