Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
So I went and slapped the new oil pan on And what was with that new pickup tube--I made the old one fit with my 2lb mal---I dunno if it will work but it fit dag nabbit :rofl: So once the new pan was on--it was time to start figuring out the wiring harness. On the last 2rz I did--I totaly ripped the harness apart--but I also had to 100% wire that rig up--this time I wanted to try and do it without modding the harness much--give it that true stock feel... Well since we are using the stock guages--I went and swiped the stock oil presure and engine temp sensors off the 3.0. The temp sensor had to have the connector swapped where the oil pressure was the same..
So I went and slapped the new oil pan on
And what was with that new pickup tube--I made the old one fit with my 2lb mal---I dunno if it will work but it fit dag nabbit :rofl:
So once the new pan was on--it was time to start figuring out the wiring harness. On the last 2rz I did--I totaly ripped the harness apart--but I also had to 100% wire that rig up--this time I wanted to try and do it without modding the harness much--give it that true stock feel...
Well since we are using the stock guages--I went and swiped the stock oil presure and engine temp sensors off the 3.0. The temp sensor had to have the connector swapped where the oil pressure was the same..
