• Help Support Hardline Crawlers :

Reply to thread

I got to researching and thinking... I know a lot of times gauges can be off 5-10 degree and slow to read actual temp. When my gauge say 205-210 it very well could be at 215-220, over the boiling point of water. That is where the guiser is coming from. I'm going to swap my thermostat out and use a heat gun to make sure it opens and flowing water correctly. Let it run for 2-3 hrs and hopefully burp the air out and the system .

Also picking up a pressure checker to check and see if the cooling system leaks down over night before I start tearing it down.


114 Words
Back
Top