6.0 Throttle Body

  • Thread starter Thread starter Cole
  • Start date Start date
C

Cole

Guest
I am looking for a Throttle body for my 6.0. Its out of an 06 HD and is currently drive by wire, but I am converting it back to Cable.
Any certain Throttle body I should get, one make more power than the other.
 
Best throttle body to have for a stock intake is just a regular stock throttle body. Port and polish is worth an extra 5 or 7 hp. I just sold a LS6 intake and ported and polished throttle body for $300 bones. I went with a F.A.S.T. 90/90MM combo. So there are some good deals to be had, just have to look. Best place to find them is here: http://ls1tech.com/forums/forumdisplay.php?f=45
 
If you go with a stock unit, try the part number at partszoneonline.com
Thats where I got all my stuff for the LS1 oil pan. They are lowest on prices after shipping than anyone.
 
Cole said:
Let me know how much you want for it.

Just make sure your programmer knows that TB is on there. Carl had to borrow one from a 5.3 to put on his 6.0 and the engine ran like crap until they re-flashed the computer to match the TB.
 
wngrog said:
Just make sure your programmer knows that TB is on there. Carl had to borrow one from a 5.3 to put on his 6.0 and the engine ran like crap until they re-flashed the computer to match the TB.

Yeah I am sending the Harness to Jims Performance, and I will let him know.
 
Juan_Hong_Loe said:
I sent it out today. I put a note in there for you that said you would be running a manual throttle body. Put all your contact info on there as well. thumb.gif

Awesome, maybe I need to call him and let him know its on the way.
 
Back
Top