spidertoy
Mod dude....
receivers? I know that I need a 3 channel, but which one, what brand, why, what about brushless motors? whats the benefit?
-
Help Support Hardline Crawlers :
alright what about
- Thread starter spidertoy
- Start date
Dixon Ticonderoga
Active Member
you can get a tq3 from ebay new for about 25 shipped and mod it for 4ws in 5 minutes for the price of a switch at radio shack (about 4 bucks).
Todd1803
Well-Known Member
Dixon T is right about the TQ3. You can save a bunch of $$ if you have even basic electronics skills (you can solder some wires). There is a sticky on the rccrawler board with a ton of onfor on modding these radios.
smr4runner
Well-Known Member
- Joined
- Apr 1, 2006
- Messages
- 170
The best way to get TQ3's is to go to your LHS and ask if they have any in the back available.
The Traxxas TQ3 comes with the REVOS, E-MAXX, T-MAXX, etc.
Some buyers upgrade the radios/recievers during purchase of the rigs to get a better deal. So the LHS just takes TQ3 out of the box.
I have purchased 3 of my TQ3's this way. All came w/recievers for $30.
Modding the radio cost about $4 for the return to center toggle switch at radio shack. 10mins to mod.
Good luck
The Traxxas TQ3 comes with the REVOS, E-MAXX, T-MAXX, etc.
Some buyers upgrade the radios/recievers during purchase of the rigs to get a better deal. So the LHS just takes TQ3 out of the box.
I have purchased 3 of my TQ3's this way. All came w/recievers for $30.
Modding the radio cost about $4 for the return to center toggle switch at radio shack. 10mins to mod.
Good luck
Last edited:
Dixon Ticonderoga
Active Member
you can also wire it up with a potentiometer from radio shack, for proportional steering, if your so inclined.
