Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
This is how I see it...I'm probably wrong though The shackle length shouldn't matter as much as the angle of it. I would think you would want the shackle perpendicular to the angle of the top leg of the antiwrap bar...with the shackle pointing up. That way when your springs try to wrap they are pulling directly against the shackle. So if your bar tilts up from the axle then the shackle would be pointed back a little bit. :shrugging:I just ordered a heim but if you included the spacers then the johnny is probably the cheaper way to go...especially if you forgo the threaded rod and just weld it to the tube
This is how I see it...I'm probably wrong though
The shackle length shouldn't matter as much as the angle of it. I would think you would want the shackle perpendicular to the angle of the top leg of the antiwrap bar...with the shackle pointing up. That way when your springs try to wrap they are pulling directly against the shackle. So if your bar tilts up from the axle then the shackle would be pointed back a little bit. :shrugging:
I just ordered a heim but if you included the spacers then the johnny is probably the cheaper way to go...especially if you forgo the threaded rod and just weld it to the tube
