Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Do everything on it more heavy duty than you think it needs. Otherwise you'll end up doing stuff twice...like me:flipoff:1 1/4" pipe didnt bend. I braced it between the "y". I ripped the whole thing off the axle once so I went with much thicker metal on that mount and braced and gusseted it since this pic was taken. If you are gonna mount it to a cruiser axle then really add alot of gussets and braces cause the cruiser housing is THIN.I used a 5/8" heim at the top. Only reason it has lasted is that it was VERY good quality.I mounted the shackle to the stock crossmember. This crossmember is thin so again be careful with welding to it.
Do everything on it more heavy duty than you think it needs. Otherwise you'll end up doing stuff twice...like me:flipoff:
1 1/4" pipe didnt bend. I braced it between the "y". I ripped the whole thing off the axle once so I went with much thicker metal on that mount and braced and gusseted it since this pic was taken. If you are gonna mount it to a cruiser axle then really add alot of gussets and braces cause the cruiser housing is THIN.
I used a 5/8" heim at the top. Only reason it has lasted is that it was VERY good quality.
I mounted the shackle to the stock crossmember. This crossmember is thin so again be careful with welding to it.
