Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
from the looks of the pic your tierods contact when you rubber snubber is only an inch or so from bottoming. very easy fix would be to lower/raise that snubber a little. your only going to lose a little travel. moving that box foward is alot of work compared to moving snubber or strike plate. core suport mount gets in the way when moving box foward unless you tip the input down and the front up to clear the cs mount. if you tip box down then the ragjoint flexes too much and needs to be upgraded to u joint with no ragjoint and the draglink will then hit your leaf spring if tiped down so then you need a flat pitman arm from sky or somebone else toget that tierod end closer to the frame for spring clearence. move snubber --thats the easy fix.
