• Help Support Hardline Crawlers :

Reply to thread

Slowly making progress.

Pulled the drivetrane out to install the torque converter. Sealed up between the tcase and trans. Up to this point, knowing I had to pull everything to to the torque converter, everything was just bolted together temporarily.

Cleaned up the engine a little and put new intake and oil pan gaskets in.


Got the steering plumbed.


Fuel system is fully plumbed.


Built the driveshafts.


Just finishing up the framework for the engine skid.


Next up is to throw the spool in the rear, new ball joints in the front and pull some wires.




Sent from my SM-G935P using Tapatalk


Latest posts

Back
Top