Looking at doing axle swap on my TJ. I did some online research which showed some results but I'm sure a lot of people have done this on this forum. So my question is where is the best place to buy brackets to put 1 tons under my TJ? This will be a "junkyard axle" swap.
-
Help Support Hardline Crawlers :
Brackets for 1 ton axle swap in a TJ.
- Thread starter GMS77
- Start date
whiskeymakin
Well-Known Member
Lots of factors will depend on a "kit". Most are custom made to fit.
Mr. Hogg
Full Throttle Junkie
Are you "building" a custom Long Arm Suspension as well? OR do you want OE stlye brackets that will match up to OE style suspension or off the shelf suspension kit.
If I were building a suspension at the same time, I would order parts from a Ruff Stuff/ Barnes/Poly/Ballastic/etc.
If I were using a OE style kit, I would look at somthing like the Genright Kit ( http://www.genright.com/ProductInfo.aspx?productid=BCE7110 )
If I were a cheap-ass booty fab fabricator, I might cut the brackets off the D30/D35 and burn them back onto the new axles.
If I were building a suspension at the same time, I would order parts from a Ruff Stuff/ Barnes/Poly/Ballastic/etc.
If I were using a OE style kit, I would look at somthing like the Genright Kit ( http://www.genright.com/ProductInfo.aspx?productid=BCE7110 )
If I were a cheap-ass booty fab fabricator, I might cut the brackets off the D30/D35 and burn them back onto the new axles.
kushKrawlin
Well-Known Member
Check out barnes. I believe he has the best prices. And his service is untouchable. I broke somthing, called Brad, and he sent me a replacement before I sent the broke one back. That does not ever happen, for me anywAys. I have spent quite a bit of money at Barnes with no regrets.
Billcow
Well-Known Member
give EOR a call artec has a new full 1-ton swap kit
