got some more stuff done
got the shackle mounts welded in and supports along with them
put in a couple supports between the hanger and xmember
I put in the ifs shocks just to see where they might mock up, with as far forward as i put the axle it looks like the stock towers will actually work haha, what do you guys think about the angle?
Shackle angle at full droop
Shackle angle with full weight
Got the steering kind of mocked up, this is without a drop pitman arm so all the angles should come out fine
I need to lengthen the rear driveline about 2-3 inches and the angle looks like it'll be fine
the trans xmember is in the way of the front driveline so i'm gonna cut the drivers side, side of the xmember off and fab a piece that'll come back and then over so it'll be outta the way.
my dad brought home a front driveline out of a 00 or 01 grand wagoneer to lengthen my front shaft, thought we were gonna have to replace the whole longer side of the shaft the wagoneer but when we cut it in half turns out it fits perfectly inside the s10 shaft so now we can make it pretty much whatever size we want.
Still got a long way to go haha
