Bumpstops fo yo Airs and CO's on the cheap and easy

Bones · Oct 31, 2007

Yeah I know Bones with some tech?? WTF He's never owned a coil over or an air shock either

laughing Well I did own a set of CO's before I parted my junk 5 years ago.

Anyway reading this thread on PBB from one of your dirty southerners Redneckengineered and thought I'd pass it along.

http://www.pirate4x4.com/forum/showthread.php?t=625958

P · Oct 31, 2007

Thanks man, good stuff.

I think Joe needs to look at these for his rear CO's

1TONZR2 · Oct 31, 2007

I thought about gettin some of those bumps from PP, but they made it sound like it was a pain in the ass to take CO apart to put them on....

Brian

BamaTJ · Oct 31, 2007

You just have to take the bottom retainer off, it should not take long

Bones · Oct 31, 2007

BamaTJ said:
You just have to take the bottom retainer off, it should not take long

Little heat and some patience, all should be fine.

kid rok · Oct 31, 2007

I am running the ones from poly, They didn't help enough (Heavy rig) so I am also running air bumps problem solved. There actually very easy to put on. I didn't worry about scratching up the shaft, I just got a pair of vise grips grabed as low as possible and twisted the end off. Have jumped mine with the stock bumps the pp bumps and the air bumps. The pp bumps help a little but not enough in my opinion.

P · Nov 1, 2007

Im going to run air bumps up front, but I was thinking of giving the TJ thing a wirl in the rear. :popcorn:

kid rok · Nov 1, 2007

I have never had a problem bottoming out the rear. No matter how hard I hit it from the rear I can't seem to bottom out my shaft on either side.

blacksheep10 · Nov 1, 2007

kid rok said:
I have never had a problem bottoming out the rear. No matter how hard I hit it from the rear I can't seem to bottom out my shaft on either side.

she won't even let me hit it hard enough from the rear to try to bottom my shaft out hitit