Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Currently do not have torch height control, It is set up with the manual control and normal torch. I have been considering the machine torch and arc height control, and maybe a plate marker.95% of the material we use is 1/8" thru 3/8" pno, so with correct speed and not having long runs really close together together it typically isn't a problem with height. On thinner than 1/8", or long narrow pieces close together you can adjust the torch height with the handle, not the best, but works until we do the height control.
Currently do not have torch height control, It is set up with the manual control and normal torch. I have been considering the machine torch and arc height control, and maybe a plate marker.
95% of the material we use is 1/8" thru 3/8" pno, so with correct speed and not having long runs really close together together it typically isn't a problem with height. On thinner than 1/8", or long narrow pieces close together you can adjust the torch height with the handle, not the best, but works until we do the height control.
