cvds ax-10

[chevota1]

just got a setof mip cvds just thaught i would show every one theimproved steering angle over stock also theyhavemuch less slop

 

[Hellbilly]

Mine are installed! I need to shave a little off the steering arm and figure out how to get the radio adjusted to get the maximum steering!

 

[chevota1]

dont shave the knuckle it will break you have to countersink the hole on the axle c thenuse a taperhead screw so its flush.then you max out the tie rod on the pumpkin

 

[Hellbilly]

dont shave the knuckle it will break you have to countersink the hole on the axle c thenuse a taperhead screw so its flush.then you max out the tie rod on the pumpkin

Yeah I did that! I got to looking at it and figured I dont need to shave it.:redneck:

 

[chevota1]

read this http://www.rccrawler.com/axialcompbuild.html

 

[Hellbilly]

Flipped my tie rod around so the bend was pointed forward and now I'm touching the inner c with the steering arm!