D60 knuckle/spindle studs

[nick c]

Are these all pretty much the same?

I had a 80's era Dodge 60, I need new studs for. My old spindles are no longer around, so I have nothing to reference. Just curious if anyone knew off hand before I go down to NAPA and start looking around.

I need to get the axle back together so it can go on to the new owner of it.

 

[Binder]

Ford studs are different. Chev/ Dodge kingpin should all be the same but I can't say for a fact.

 

[Maverick26]

They are 1/2" studs but im not sure of the length, maybe around 1.5"-2". Try Napa and ask for that years knuckle studs. If not you may have to search the used market to try and find some. Good luck.

 

[dove'd85]

napa,schmucks,auto zone all have the studs you need.. if you had one to compare to it would make it much easier,

i had to go to two napa's and 4 shucks' before i found the right studs and all the studs i needed(enough to do both sides)

good luck

 

[nick c]

Any idea what you paid? I can get them from Foothill Offroad's site for $18/set(6) so thats $3 each. But it will save me the pain of hunting all over for them.

 

[dove'd85]

Any idea what you paid? I can get them from Foothill Offroad's site for $18/set(6) so thats $3 each. But it will save me the pain of hunting all over for them.

iwould just do that if i were you

i payed around 3.10 each

 

[nick c]

thanks, i put the order in. Hopefully they come quick.

 

[Pook]

Mine were 1/2" on my 84 Dodge D60