Dana 60 measurement needed

[JayH]

Anyone got a measurement on a front Dana 60 stub shaft, from u-joint centerline to wms? Also what application is your axle originally from?

Thanks for any replies.

Jay

 

[crash2]

Thats an odd measurement.

 

[JayH]

ya, I know. The project has begun.

I'm trying to figure out overall lengths of tube and axle shafts (inner and outer) in order to get to my target track width. I'm hoping not to have to mix different backspaced wheels on the rig and I'm pretty narrow for a one-ton application, ya know?

 

[crash2]

ya, I know. The project has begun.

I'm trying to figure out overall lengths of tube and axle shafts (inner and outer) in order to get to my target track width. I'm hoping not to have to mix different backspaced wheels on the rig and I'm pretty narrow for a one-ton application, ya know?

I have a broken stub that I can measure but no way to see how it sits in the outer aposed to where the WMS is...

 

[darius]

balljoint centerline to wms on a 60 is 8.5", I believe, hopefully that helps.

 

[crash2]

balljoint centerline to wms on a 60 is 8.5", I believe, hopefully that helps.

I went and eyeballed mine and thats pretty close--without pulling the wheel off...

 

[JayH]

That's perfect guys.

I can now finish ordering parts and finalize the design specs for my new front end. Now all I need is a grand or two Nothing a little time won't fix.

Thanks again!