kid rok
Well-Known Member
- Joined
- Jul 8, 2007
- Messages
- 1,460
A couple of guys and myself went to Dayton today to try out the new course for Werock or something like that. My buddy is more into crawlin and that's what his rig is set up for. He did great crawled some pretty cool stuff. I was there to goof off. Well, started out hitting some small ledges and reverse went out on the trans. No problem I just need to hit steeper **** so I can roll off of it. played a little more and with a little encouragement from George and kenny tryed a decent line. First attempt, rolled off the side of the hill. Up righted my rig and tryed the same line, this time alittle more throttle. I started floating to left and was a few feet from going off ten' high ledge stayed in the throttle and it pulled back to the right, but a little to much and down I go. For some reason I ended up pulling off a classic Kelly save and rode it out. When I hit on the right side it snapped my upper heim which made my axle roll which made my lower heim pull out the threads which made the axle roll more which made both my rear coilovers break. Plus cracked my trans housing and knocked a big hole in the oil pan.
If anyone gets a chance to try out Dayton it's a pretty cool place. Basicly they blasted a cliff and everything to hit is right there close together. Kenny has alot of technical steep and off camber climbs, as well as some steep go fast jump at the top stuff. You can easily play there all day+.
If anyone gets a chance to try out Dayton it's a pretty cool place. Basicly they blasted a cliff and everything to hit is right there close together. Kenny has alot of technical steep and off camber climbs, as well as some steep go fast jump at the top stuff. You can easily play there all day+.
