Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Get going REALLY fast in reverse and hit something. Should take a good 6-8 inches off the back. :redneck:It really all depends on what vehicle you're bobbing. When I bobbed my dads ranger, I was able to cut 14 inches out, and the rearmost bedbolts then bolted into the center bolt holes in the frame. The rest is just being able to cut a straight line, and weld sheetmetal back together. As for the doving, someone else will have to chime in, cause I'd say just smash into something till you get the desired result. :redneck:
Get going REALLY fast in reverse and hit something. Should take a good 6-8 inches off the back. :redneck:
It really all depends on what vehicle you're bobbing. When I bobbed my dads ranger, I was able to cut 14 inches out, and the rearmost bedbolts then bolted into the center bolt holes in the frame. The rest is just being able to cut a straight line, and weld sheetmetal back together.
As for the doving, someone else will have to chime in, cause I'd say just smash into something till you get the desired result. :redneck:
