H
HotRodpayton
Guest
What brand is the best? I can't afford big $ setups so will prolly just do flanges and 35 spline shafts. Anyone got any favorites? Or has anyone used Northwest Fab stuff?
-
Help Support Hardline Crawlers :
caglezxj
Well-Known Member
You can get some from East Coast Gear Supply here on the site. I have ran them and they are around 175.00 a set. I can get you the polyperformance for 245.00 shipped to your house. And Classiccityoffroad.com sells the summit machine for around 175.00 a set. And I am pretty sure EOR price on the TERA drive flanges are around 200.00 give or take.
They are all about the same in my eyes. I have used all 3 of those I mentioned.
Also if you are going chromo shafts give Jason a call at classic city off road. He has some of the best prices I have found. 1-706-207-4140 . And if you get everything from him you will get a killer deal. Tell him Josh Cagle sent you. Let me know what axle you have and I can price them also. But since I don't sell as many as CCOR they get a better deal.
They are all about the same in my eyes. I have used all 3 of those I mentioned.
Also if you are going chromo shafts give Jason a call at classic city off road. He has some of the best prices I have found. 1-706-207-4140 . And if you get everything from him you will get a killer deal. Tell him Josh Cagle sent you. Let me know what axle you have and I can price them also. But since I don't sell as many as CCOR they get a better deal.
C
Cole
Guest
Call chase at east coast gear supply he will take care of you.
H
HotRodpayton
Guest
Ok I give him a call. What about a rebuild kit for a 205
I run the Warn flanges and have not had any problems out of them. Now if you want some bling blang, call Rock and Roll Off Road and some of these.
[attachment deleted by admin]
[attachment deleted by admin]
blacksheep10
XBJRA champ/ 555 and team Nasty codriver
- Joined
- May 22, 2007
- Messages
- 10,442
- Reaction score
- 3
Those fags copied my idea 
I took pics of my poly flanges when I got them in like 04 in front of miles's old lady's tits and they got leaked to pirate. Pig started using them as his for sale pic. Since then R&R started doing it :
laughing1
Bones, Paul, somebody, bring those pics back
:afro:
I took pics of my poly flanges when I got them in like 04 in front of miles's old lady's tits and they got leaked to pirate. Pig started using them as his for sale pic. Since then R&R started doing it :
laughing1Bones, Paul, somebody, bring those pics back
:afro:
H
HotRodpayton
Guest
Got em from East Coast Gear today. Should have them this week. Chase is a nice guy. Good price for sure. Went with Drive Flanges and Chromo Stubs.
I bought some Warns because ORC had them in stock. If I ever need another set I will get ECGS, but as it is I have 2 sets now and I don't think I will need anymore.
Budget YJ
Well-Known Member
Got mine from ECGS also. 
cant beat the price
The screws where a lil hard to get started.
I had to turn them counter clockwise till u hear them click then clockwise to get them to start :****:
cant beat the priceThe screws where a lil hard to get started.
I had to turn them counter clockwise till u hear them click then clockwise to get them to start :****:
1TONTJ
Amateur Hardcore
I bought these from RPM Offroad.
$175.00 shipped for the set without slug eliminators.
[attachment deleted by admin]
$175.00 shipped for the set without slug eliminators.
[attachment deleted by admin]
Budget YJ
Well-Known Member
I looked at those too :****:
I likem
I likem
JFab
Well-Known Member
1TONTJ said:
haha, that ****'s funny right there....fat bitch tested...
![PICT2338 [640x280].JPG](http://attachments.www.hardlinecrawlers.com/xfmg/thumbnail/19/19758-17145072c3f91967ecd6681169aa0160.jpg?1652262126)