Starting to work on the truck agian. I managed to get the front end tacked in place. I ended up having to cut out the firewall for clearance. As of now I have a good 13"s of up travel. Should be real close to the same for the down travel. More than likely I will strap it at 12". It's actually setting pretty close to ride height. It sits now at 18" and at full bump I should have 5" under the front. Thats actually kind of high. Most of the trucks have about 2"-3" at full bump, some even lower. The track width is about 2" + wider than stock.
[ATTACH=full]156956[/ATTACH]
Flexing out. I think my motor is alittle off set.
[ATTACH=full]156957[/ATTACH]
Part of the Yframe supporting the lower bulkhead.
[ATTACH=full]156958[/ATTACH]
Sporting that classic TT stance. It's starting to take shape.
A buddy of mine is coming over this weekend to check to see if i'm ok where everything sits. Then it's back to adding tube, hopefully get the engine mounted and the front engine cage done.
I pulled a line from front to rear and I may be off by 1/16 at the most. I can live with that. Considering the truck is 35 years old thats not too bad.
