Boonie Buster
Stuck on a Curb
Wasn;t there a company that sold just the center section then the outer knuckles? So you could tube your own axles? I could have swore Trail-Gear had something like that...
-
Help Support Hardline Crawlers :
Front Toyota Axle parts
- Thread starter Boonie Buster
- Start date
CHOP SHOP
Well-Known Member
boonie, stop thinking. toyotas dont need thinking, its all been done.
thinking is only needed for s10s and nissans.
I thought you wanted to get away from the "over engineered, never wheeled" kinda stuff? :scratchhead:
thinking is only needed for s10s and nissans.
I thought you wanted to get away from the "over engineered, never wheeled" kinda stuff? :scratchhead:
traildemon
Well-Known Member
X2 keep it simple
boardbysled
Tree Nerd.
I disagree:flipoff::redneck:
Diamond axle makes custom Toy fronts http://www.diamondaxle.com/front_steering.htm They might sell the parts un welded too.
Boonie Buster
Stuck on a Curb
.WHITE TRASH1
fruit stripe
Gusset it end to end with a truing bar in it while you weld so you can see how much it gets pulled and then get it back straight. Other than that stop fawking thinking and start doing.
Damnyankee
Well-Known Member
how can you disagree?
He's right, nobody makes **** for us.
Its all 1 off stuff unless you want the crappy calmini SAS kit.
boardbysled
Tree Nerd.
It was pretty simple for me. I did use the calmini hanger kit, but made my own crossmembers. It only took like 4 days plus a few days after work of working on it to get it done.
The calmini front hanger aint bad, but i hate the shackle kit. I think i am gonna go to a frenched shackle kit.
Hijack off:flipoff:
![IMG_3262[1].JPG](http://attachments.www.hardlinecrawlers.com/xfmg/thumbnail/4/4800-f86115cd9d3913fc387d8041d6459ca5.jpg?1625928482)
