• Help Support Hardline Crawlers :

Reply to thread

Re: Re: Re: Re: Re: Full Hydro Steering help, another newb question.




Take all the lines off at the lowest point, drain, steer the orbital back and forth, push the ram back and forth, then fill it all back up and manually bleed/burp it the best you can with whatever fluid you plan to use.



You probably didn't mix enough of the "wrong" fluid to cause a problem unless you are getting foaming/bubbles. Some additives/chemistry doesn't play well together.


I'd suggest running a good all weather tractor/equipment hydraulic fluid instead of ps fluid. (mainly because you'll know exactly what it is, instead of just "power steering fluid" which is difficult to find spec sheets on even tho it is really just hydraulic fluid)


127 Words
Back
Top