Gdale Run?

[BamaTJ]

Hey anybody want to make a Gdale run this Saturday or next Saturday? My buddy Adam says there is a new hill out there than has not been climbed. I just want to get out and ride and have fun in the woods. Anybody? Can park a few at my house and more at the church behind me. Maybe meet in the AM and be done by early afternoon..

 

[John Galbreath Jr.]

I probably can next Saturday, this Saturday is out with the car show.

 

[BamaTJ]

Yeah Jamie is off next weekend and could make it also I think. What about the rest of you, any interest in next weekend?

 

[P]

I may have some interest in next weekend ! Depending on HB and the weather ! laughing1

**** I dont even have a tag on SweetPea , Id have to go ill-eagle and drive it back roads from the aeroporte :****:

 

[BamaTJ]

Anybody up for this weekend? I still have to put my front end back together but I should be ready by Sat..

 

[John Galbreath Jr.]

Single Seater is running like ****. Until I can get somebody to look at it, I am down. I have replaced fuel pump, fuel filter, plug wires, TK changed rotor button and distributor cap. Nothing has helped at all, seems to just be getting worse. Missing and backfiring.

 

[BamaTJ]

What about that show rig you have? You ever going to get some dirt on it???

 

[John Galbreath Jr.]

What about that show rig you have? You ever going to get some dirt on it???

Sure, but we have some magizine and TV commitments first. We are working on schedules now.

 

[CHASMAN9]

Sure, but we have some magizine and TV commitments first. We are working on schedules now.

Sounds like you need a booking agent. I'm not free, but cheap and can be had... laughing1

 

[John Galbreath Jr.]

Well, I worked on the driveline some today. I stripped a drive flange at Frenzy. Both inner and outer shafts were twisted, but I put them back in. Also replaced the wheel bearings on the front on both sides. Now, if I can only find someone that can get it running right. So closer, but still out without a better running motor. I won't go as I don't want to bog the group down.

Who is in?

 

[BamaTJ]

John have you checked Fuel Filter and Pump? Mine was running like crap the end of last year and I replaced those and it is fine now. I also had some trash in the filter/lines.

Right now it is just me. Adam Ragland (72Dozer) on here is going to meet us out there as well. Maybe a few of his buddies also, they have cut some new trails.

Anybody else going to make it? Rich, Ricky, Jamie, TK??? Gregg you still broke?

 

[John Galbreath Jr.]

Replaced both the fuel filter and fuel pump. I do know when it happened. It was on Cable Hill. Rig was hot. It was pulling good, then started backfiring and missing. I backed off, and it has never been the same since. I can't determine if it is fuel or spark related. I am at a loss on this one.

 

[P]

I may , Im juggling going to MMORV to get a lift for the JK and a few other things plus I have HB... my life is crazy

 

[CHASMAN9]

John have you checked Fuel Filter and Pump? Mine was running like crap the end of last year and I replaced those and it is fine now. I also had some trash in the filter/lines.

Right now it is just me. Adam Ragland (72Dozer) on here is going to meet us out there as well. Maybe a few of his buddies also, they have cut some new trails.

Anybody else going to make it? Rich, Ricky, Jamie, TK??? Gregg you still broke?

As of 1:30 my rear was torn apart but with any hope it will be ready. I still do not have a 2nd gear though, but 2nd is overrated anyway, right? I got to look at my baseball schedule as well. But, if at all possible, I"M GOING AND NO|T GOING TO BREAK DOWN THIS TIME.............

 

[John Galbreath Jr.]

, I"M GOING AND NO|T GOING TO BREAK DOWN THIS TIME.............

Okay, I'll brink my restrictor plate and super duper heavy duty throttle return spring, and a 2x4 to screw to the floorboard under your gas pedal.

 

[CHASMAN9]

Okay, I'll brink my restrictor plate and super duper heavy duty throttle return spring, and a 2x4 to screw to the floorboard under your gas pedal.

Can I borrow the 38?

 

[BamaTJ]

Your rear end was completely bare yesterday afternoon when I was there Gregg. Should be going back together today.

 

[CHASMAN9]

Your rear end was completely bare yesterday afternoon when I was there Gregg. Should be going back together today.

Yah, I saw that also. he has the gears and will be completing it today and will be re-working my front links today as well. If all goes well, I might join you late in the day as I have baseball till 1:00. Will ya'll be riding until late afternoon?

 

[BamaTJ]

Doubt it man, I hope to be done by early afternoon (2 or so). Prob leave about 9 or so. Gdale does not take long if you just have a few rigs.

 

[CHASMAN9]

Doubt it man, I hope to be done by early afternoon (2 or so). Prob leave about 9 or so. Gdale does not take long if you just have a few rigs.

Ya'll have a good ride. Maybe looking at MM the next weekend.