Ghey Taco gets the blang... Plus a surprise ;)

CheapJ7 · May 2, 2008

Wanted to just scavemge the stock shafts from the K Kaiser frontend, but decided to do things proper...
Pulled it down today... What a bitch when your spindle is blowed out like a prison fags ass...

Bonus*** Just for reading my thread...
Bikini Shot of Watkins pillows...

And.... an old road rash ooozing pus on teh beach drunk as piss shot...
The salt and sun Wasn't good for it ;D

Bones · May 2, 2008

Dummy head

D44 Chromo...can't hide $$

CheapJ7 · May 2, 2008

Bones said:
Dummy head

D44 Chromo...can't hide $$

$190 bucks is alot better that the $1200 for a 60 that i don't have....
Can't hide Broke.. ;D

Bones · May 2, 2008

CheapJ7 said:
$190 bucks is alot better that the $1200 for a 60 that i don't have....
Can't hide Broke.. ;D

don't be a weetodd like me and sink chromos/CTM's/ARB into a 44

InDaShop · May 2, 2008

stock 60 is better than that 44 ****

CheapJ7 · May 2, 2008

i know i know.. But it as either buy those...
break the set of stock shafts i could rob out of my spare axles..
Or not wheel MMORV and save for a 60..
i want to wheel dammit...
but those bitches are getting 760X joints and i'm still rockin the welded lockrite..
Im not spending money on that ****..

blacksheep10 · May 2, 2008

I say good call. gets you back in the woods high steer, arb, on and on would be dumb.

Bones · May 2, 2008

blacksheep10 said:
I say good call. gets you back in the woods high steer, arb, on and on would be dumb.

Just SAY it Kelly! Gooosh! laughing1 Mine was a driver when I built it, that's my excuse.

CheapJ7 · May 3, 2008

blacksheep10 said:
I say good call. gets you back in the woods high steer, arb, on and on would be dumb.

High steer.. then I wouldn't have my tube bumper protecting my housing.. :flipoff1:

P · May 3, 2008

Is the munster truck ready for mud whoompin yet ???!!!!

( Im tryin to get lil girls calmed down enough were I can get to wrenchin on my junk. I need to roll that thing again soon )

wontwork · May 3, 2008

I see trailriding in the furure plans next weekend. :dunno:

JRich get that **** together so I can put soem metal in the back of that beast. Me and my students are tired of watching videos and need a project to work on.

P · May 3, 2008

wontwork said:
I see trailriding in the furure plans next weekend.

JRich get that **** together so I can put soem metal in the back of that beast. Me and my students are tired of watching videos and need a project to work on.

I need a removable, alum rack for the back of my buggy.....

laughing1

Heck yea, Id love to get mine setup and out in the woods next weekend for some trail testing. Lets see what we can make happen... maybe a Gdale trip ??

wontwork · May 3, 2008

P said:
I need a removable, alum rack for the back of my buggy..... laughing1

Heck yea, Id love to get mine setup and out in the woods next weekend for some trail testing. Lets see what we can make happen... maybe a Gdale trip ??

I might even put a radiator in my junk to go do some riding.

Can make the rack, but I am only able to run my portable wire welders. Reason being the DA's that wires the building wires in wrong for every welder that I have. Everything is bassackwards from what it should be so have fuse blocks ordered to make it all happen. Just don't know when maintanence will get them in to fix my 3 phase welders.

CheapJ7 · May 3, 2008

wontwork said:
I see trailriding in the furure plans next weekend.

JRich get that **** together so I can put soem metal in the back of that beast. Me and my students are tired of watching videos and need a project to work on.

I've got the front end pulled down to the housing right now..
I need to figure out what outer parts you have so i'll know what i need to buy..
I need 2 spindles and a Hub...
Soon as i get it back rolling we'll skin it..
n

wontwork · May 3, 2008

CheapJ7 said:
I've got the front end pulled down to the housing right now..
I need to figure out what outer parts you have so i'll know what i need to buy..
I need 2 spindles and a Hub...
Soon as i get it back rolling we'll skin it..
n

I only have one spindle, but the threads are no good.
Will check with my uncle at lunch and see what he has got.

blacksheep10 · May 3, 2008

I'm running a spindle right now that had an outer explode in it. swelled it so bad it broke the inner race on teh bearings and broke the nuts. I just put it in the lathe, turned the bearing land back to the right OD and fixed teh threads with a hacksaw. easy as pie.

watkins · May 3, 2008

boat racing is fun! going again this fall. 8)

that scuffed up arm was a salt and sand magnet!

wontwork said:
I see trailriding in the furure plans next weekend.

JRich get that **** together so I can put soem metal in the back of that beast. Me and my students are tired of watching videos and need a project to work on.

haley, can you punch me some 5/8" holes in some tabs i am making?

P · May 4, 2008

watkins said:
haley, can you punch me some 5/8" holes in some tabs i am making?

I like the sound of that !!

wontwork · May 4, 2008

watkins said:
boat racing is fun! going again this fall. 8)

that scuffed up arm was a salt and sand magnet!

haley, can you punch me some 5/8" holes in some tabs i am making?

Bring them by work. In the new shop on the hill directly behind Walker's baseball field, or call me 275-0681.