TBItoy
Well-Known Member
Bunch of us are riding on Sat 31 at GMP.
Come on out and hit some rocks with us.
Come on out and hit some rocks with us.
-
Help Support Hardline Crawlers :
Golden Mountain New Years
- Thread starter TBItoy
- Start date
TBItoy
Well-Known Member
Sawzall said:
May head up friday and check out the trail cutting.
Where is the new trail going?
Sawzall
Well-Known Member
- Joined
- Jun 12, 2011
- Messages
- 658
- Reaction score
- 75
TBItoy said:
It will be either off of trail 28 between the huge rocks or off of the new trail on the right up the hill on the main road just before the campground. I can't remember the number of the last trail but if we cut in that area will probably end up being a rock garden.
rockwell 1
Well-Known Member
- Joined
- Feb 26, 2009
- Messages
- 245
- Reaction score
- 2
will be there friday morning . the new trail will be between the big rocks at the top of 28.we could use all the help we can get.cut trails during the day ride at night.
GNorton
Well-Known Member
We are going on Sat. Should be 4 rigs.
GONOVRIT
Well-Known Member
Check, 3rigs and a rentalGNorton said:
Damn I'm gonna be missin my other 4cylinders laughing1Had a great time this at GMP. Big thanks to Sawzall, Rockwell 1, jcorlew and Albert for helping us out and showing us around.
My clutch let out at the top of trail 14 on Friday night right after I went and put a yellow top in it....
Shot 2 holes thru the top, one out the bottom and seized up the shifter. Haven't taken it apart yet.
Some random pics
My clutch let out at the top of trail 14 on Friday night right after I went and put a yellow top in it....
Shot 2 holes thru the top, one out the bottom and seized up the shifter. Haven't taken it apart yet.
Some random pics
TBItoy
Well-Known Member
We showed up on Friday to help cut trails... But as soon as we got in the park, the water dept called and said that I had a leak and had used 140,000 gallons of water this month. 
uke:
Turns out their compression fitting coming out of the meter had come loose and was running a **** ton of water off in teh holler in front of the house... I never noticed it, but I had to go home and find the leak and dig the sumbitch up... Ruined my Friday.
We rode on Saturday tho. Had lots of breakage in our group. I busted a front ring gear and Rodney blew a D60 u joint, which took out both shafts and the inner C... blew the knuckle off at the top of Honey Bee, had to 3 wheel piggy back him out and use the backhoe to get it on the trailer....
Here are some pics. Couldn't have asked for better weather to cruise around in the woods.
uke:Turns out their compression fitting coming out of the meter had come loose and was running a **** ton of water off in teh holler in front of the house... I never noticed it, but I had to go home and find the leak and dig the sumbitch up... Ruined my Friday.
We rode on Saturday tho. Had lots of breakage in our group. I busted a front ring gear and Rodney blew a D60 u joint, which took out both shafts and the inner C... blew the knuckle off at the top of Honey Bee, had to 3 wheel piggy back him out and use the backhoe to get it on the trailer....
Here are some pics. Couldn't have asked for better weather to cruise around in the woods.
TBItoy
Well-Known Member
Rear driveshaft slipped apart and u joint broke
Tight squeeze on new trail. Don't know if this tree will have to be cut or not. I would have tried it but I had already broke my front gears
Tight squeeze on new trail. Don't know if this tree will have to be cut or not. I would have tried it but I had already broke my front gears
Sawzall
Well-Known Member
- Joined
- Jun 12, 2011
- Messages
- 658
- Reaction score
- 75
Pictures don't do the roll over justice. If the tree had not have stopped it there would have been a barrel roll off the hill.
The tree entering the new trail will have to be cut. We were thinking about trying to leave it to make a squeeze like the one in Lions Den at Harlan but the rock wall is too long and tall we think. Also the exit would be a winch only without building something over the big gap in the rock.
The tree entering the new trail will have to be cut. We were thinking about trying to leave it to make a squeeze like the one in Lions Den at Harlan but the rock wall is too long and tall we think. Also the exit would be a winch only without building something over the big gap in the rock.
TBItoy
Well-Known Member
Sawzall said:
I'd like to try it with the tree in there. I really don't see a one ton rig getting through there tho... There is only 6 feet between the tree and rock wall.
The exit looks fun. Most likely will be a winch hill anyway, but I'd still run it.
